0
What else can I help you with?
Why a Polaris trailblazer 250 won't start?
polaris 250 wont start
What is the compression for a polaris 250 2cycle?
your compression should be around 125-135 psi. for a 250cc polaris trailboss or trailblazer.
what year is my polaris 250 trailblazer vin number 4xaba25c4y2453002?
what year is my polaris 250 trailblazer ? vin number is 4xaba25c4y2453002
How fast is a polaris trail boss 250?
My 98 polaris trail boss does about 55-60mph
How do you change oil in Polaris 250 ATV?
Hey, if im thinking right Polaris 250 s were all 2 stroke, no oil needs to be changed.
What is the compression for a 1993 Polaris 250 Trail Boss?
I have a 1993 Polaris 250 Trail Boss. It won't start. It floods out the carb. Could it be low compression?
How fast is a 250 polaris?
About 45 - 50 on a good day..
Change starter on polaris ATV?
How do I replace the starter on my polaris 250 4x4 Model number is EC250PF00802151. How do I change the stater on a 99 polaris explorer 4x4
Where will you find the VIN number for a 1987 polaris 250 trail boss?
it should be on the front of the frame this means take the front plactic and it should be on one of the down tubes
Remove clutch assembly from 250 polaris trailblazer picture?
A picture of the clutch assembly removal process for a 250 Polaris Trailblazer can be found in the repair manual. It details how to access, disassemble, and remove the assembly.
What is the float level on a 250 polaris?
The float level on a Polaris 250 generally refers to the height at which the float in the carburetor is set to allow the correct amount of fuel into the carburetor bowl. For most Polaris 250 models, the float level should be adjusted to approximately 15-17 millimeters from the gasket surface when the carburetor is inverted. It's important to refer to the specific service manual for your model for precise measurements and adjustments. Proper float level ensures optimal engine performance and fuel efficiency.
How do you mix the fuel for a polaris 250 2 -stroke ATV?
I have a 1998 polaris trailboss 250. You put 3 ounces of 2 cycle oil to a gallon of gas. I know this for sure. Sometimes on older trailboss's the self oiler don't work so i mix mine up and put it in the tank. Keeps you from having to wonder if your ATV is getting the oil it needs. Thanks You Poke Ur But!!!!!!!!!!!!!!!!!!!!!!!!!!1
