10w40 Motorcycle oil
1.8L It's stamped onto the clutch cover right next to the oil fill hole.
a number of things read, read the manual, id say the starter or the spark plug
If the cable is frayed or has already snapped, you will need to replace it. There's no amount of duct taping or super gluing that can save this one.
The Spark plugs on the Ex250 are under the fuel tank, to change them, you'll need to remove it.
A person can find the engine number on their Kawasaki Ninja 250R by looking at the side of the engine block. This is where the VIN number is often located, as well.
It is underneath the seat just behind the fuel tank and forward the battery. There are two round openings in a piece of plastic. This piece is removed and the filter is below.
A Kawasaki Ninja 500 engine will not fit directly into a Kawasaki KLR 250 frame without significant modifications. The two bikes have different designs, frame geometries, and engine mounting points. Additionally, the Ninja 500 is a larger and heavier engine compared to the KLR 250's single-cylinder setup, which would complicate the installation further. Custom fabrication of mounts, wiring, and possibly adjustments to the bike's weight distribution would be necessary for such a swap.
My name is bob bill and I don't know the answer lol
It is 303 pound without fluids.
The oil capacity of the 1998 Kawasaki Ninja 750 is 3.6 liters. The recommended engine oil is 10W40 semi-synthetic in a variety of brands.
Kawasaki ??
ex250 ninja 2008 10w fork oil, 360 ml and 108 mm air gap