answersLogoWhite

0

Onto the exhaust port of the engine...

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you install an exhaust pipe on to a 36cc gas scooter?

bolt it on the motor


How do you bolt your scooter?

you take a bolt and bolt it.


Can you put pegs on a scooter?

yes, you need to find a bolt that is quite long and stick it through the holes on the scooter so that about 5 inches of it is sticking out on the side you want the peg to be on, slide skateboard bearings on the bolt and screw a bolt on the end, there you go, a scooter peg.


Does a suzuki SJ50 scooter have a oil drain bolt?

no


Is there a direct bolt in 250cc engine for your 150cc Chinese scooter?

Typically, a direct bolt-in 250cc engine for a 150cc Chinese scooter is not available, as engine mounts, transmission compatibility, and overall dimensions often differ between models. Upgrading to a larger engine usually requires custom modifications, including adjustments to the frame, wiring, and possibly the exhaust system. It's essential to consult with a mechanic or specialist familiar with your specific scooter model to explore feasible options.


How do you take off a scooter wheel?

undo the bolt der but i want to take off my break on my scooter but i dont no if i want to. B:


Can you put a high performance sports exhaust on a 50cc four stroke scooter?

Yes, you can install a high-performance sports exhaust on a 50cc four-stroke scooter, but it's important to ensure that the exhaust is compatible with the scooter's engine specifications. Upgrading the exhaust can enhance performance by improving airflow, which may result in increased power and efficiency. However, be aware that such modifications may affect warranty coverage and could potentially violate local emissions regulations. Always check local laws and regulations before making modifications to your scooter.


What is the Bolt size on 3 bolt flange exhaust 96 Chevy blazer?

its a m10 1.50.


I cant get my back scooter peg to go on my mgp scooter. i think the bolt on it is too small please can someone help?

i got the same prob


Will it hurt your 150cc scooter to run it without a muffler?

you may burn up the exhaust valve.i would not do it.


What problems would you have when you bolt a razor pro scooter?

Your scooter will start oozing out poop. So i suggest shooting the poop with a uzi to prevent oozing. Hope this helps :)


How do you take out top speed restrictor plate on 50cc scooter?

To remove the top speed restrictor plate from a 50cc scooter, first, locate the restrictor, which is usually found in the variator or the exhaust. You'll need to disassemble the variator by removing the outer casing and then take out the variator weights and the plate itself. If it's in the exhaust, you may need to remove the exhaust pipe to access and remove the restrictor. Always follow proper safety precautions and consult your scooter's manual for specific instructions.