On a 1999 Harley-Davidson Fat Boy, the oil drain plug is located on the bottom of the oil pan. It is typically a hex or Allen bolt, situated near the rear of the engine. To access it, you may need to raise the bike and ensure it's stable before draining the oil. Always make sure to use a suitable container to catch the old oil when you remove the plug.
3 1/2 quarts.
According to Harley-Davidson, a 1999 Fat Boy gets 56 mpg on the highway and 43 mpg in the city. Your mileage may vary.
The drain plug for a 1999 Harley Davidson soft tail is located at the bottom of the oil tank. There is a rubber hose leading to the frame, follow it to the right side of the frame. It is located under the bike on the frame.
40 psi in rear tire... 41psi in front tire
front 36 psi rear 36psi for solo rider and 40 psi rear wheel with passenger.
4 qts..considering full drain with filter change
To change the brake pads on a 1999 Harley Davidson Fatboy, first, elevate the motorcycle securely using a stand. Remove the caliper by loosening the mounting bolts, then slide it off the rotor. Take out the old brake pads and replace them with new ones, ensuring they are properly seated. Reattach the caliper, tighten the bolts to the manufacturer’s specifications, and pump the brake lever to seat the pads before riding.
1999 Harley Davidson fuel line diagram
Harley-Davidson Race Across America - 1999 VG is rated/received certificates of: USA:E
The motor oil drain plug is located on the underside of the transmission, closest to the right side of the bike. The one closest to the left side is the transmission drain plug.
On the right side near the rear tire, you will see a 1/2" rubber hose that is attached to the frame with a sprng clamp. It has a little plug in the end of it held in with a hose clamp.
carburated