The Yamaha G9 Golf cart uses a small engine that typically has its fuel line running from the fuel tank to the carburetor, usually located on the engine side. The oil line, if applicable, connects the engine to the oil tank, facilitating oil circulation for lubrication. You can typically find both lines under the seat or behind the engine compartment. Always consult the owner's manual for specific diagrams and maintenance information.
How to remove and line up a flyway on G1 golf cart
fuel line routing on 1979 Yamaha xs1100
They are selling on line for 20,000 but you will likely have to settle for less.
If there is one it will be located from the main fuel line running from the petcock to the carbs.
If your Yamaha TTR 250 starts but keeps cutting out after a fuel minutes, it might not be getting enough fuel. Check to ensure the fuel line is not clogged.
if there isn't one in between the fuel line from the gas tank to the carb then no but you can easily add one
pull the gas line off of the carburetor and let it drain.
on the gas line between the gas tank and carb but it might not have one
To drain the gas from a 2000 Yamaha TT-R, disconnect the fuel line and drain into an appropriate container. If this is a winterization process, there are fuel stabilizers available in retail locations.
The fuel line diagram for an '88 Yamaha Route 66 typically illustrates the path of fuel from the tank to the carburetor. It includes components like the fuel petcock, fuel filter, and the lines connecting these parts. Ensure that the lines are routed without kinks or sharp bends to maintain proper fuel flow. For the most accurate diagram, consult the service manual specific to that model.
A fuel line on a Yamaha Kodiak may leak due to several reasons, including cracks or wear in the rubber line, loose connections at the fittings, or damage from impacts or exposure to harsh conditions. Additionally, age and exposure to fuel can degrade the material, leading to leaks. It’s important to inspect the fuel line regularly and replace any damaged components to ensure safe operation. If the issue persists, consulting a professional mechanic is advisable.
your float is set too high. get someone that knows what their doing to adjust it properly.