The fuse box is located just behind the battery on the left side of the machine. It looks like a right triangle, and can be removed without tools; just pull it out of the rubber grommets holding it in place.
In 1999, Harley-Davidson produced approximately 8,000 units of the 1200 Sportster model. The Sportster line was popular during this time, contributing to Harley-Davidson's strong sales. Exact production numbers can vary slightly based on different sources, but this figure gives a general idea of production for that year.
Three
In the compartment under the seat on the other side from the oil reserve
should be 20-50 wt harley oil but check with your dealer first..
The 1999 Harley-Davidson Sportster 1200 produces approximately 65 horsepower. This model features a 1200cc V-twin engine that delivers a solid performance characteristic of the Sportster line. The power output, combined with its lightweight frame, provides an engaging riding experience.
Right side of bike by the seat is the oil tank pull out round dip stick
On a 1999 Harley-Davidson 883 Sportster, the ignition module is typically located under the seat, mounted to the frame. To access it, you'll need to remove the seat by unscrewing the bolts securing it in place. The ignition module is a rectangular box connected to the wiring harness, usually near the battery area.
The spark plug gap for a 1999 H-D (Harley Davidson) is .032 to .036. The actual gap depends on the brand of spark plugs.
The proper air gap is .032 to .036 depending on spark plug brand.
The drain plug for a 1999 Harley Davidson soft tail is located at the bottom of the oil tank. There is a rubber hose leading to the frame, follow it to the right side of the frame. It is located under the bike on the frame.
To remove the speedometer sensor on a 1999 Harley Davidson 1200 Sportster, first, disconnect the battery to ensure safety. Locate the speedometer sensor, which is typically found on the side of the transmission. Use a socket or wrench to unscrew the sensor from its mounting position, then gently pull it out. Make sure to check for any wiring connections and disconnect them if necessary before fully removing the sensor.
1999 Harley Davidson fuel line diagram