the drain screw is under the crank case in the centre between the frame - ie : lie down on your back and look under your motor in the centre
Screw it in clockwise.
underneath the pull start and behind the gear switching lever
Drain plug on bottom of oil pan.
The correct tightening torque for a 1990 Honda Accord oil drain plug is 29 foot pounds. This same torque applies to all Honda oil drain plugs.
2006 honda odyssey engine oil drain plug torque
Locate the drain screw on the right of the transmission. Drain oil. Replace screw, then go to the left side and unscrew the fill screw and use a funnel to fill with Polaris tranny oil until its full to the screw hole.
The oil drain plug is located on the bottom of the engine near the oil filter.
The oil drain plug is on the front of the motor below the oil filter.
It is located on the oil pan.
Bottom of the engine on the oil pan.
The Cm-200 Has no oil filter.
Remove the oil pan drain plug to drain the oil. Remove the lower radiator hose to drain the coolant.