The serial number on a Briggs and Stratton 16 HP engine is typically found on the engine's blower housing or the valve cover. It may be stamped directly into the metal or on a sticker. For specific models, it can also be located on the engine's identification label, which is usually near the air cleaner or on the side of the engine. Always refer to the engine's manual for detailed information on locating the serial number.
44oz
5/16 bolts 25 ft/lb
To determine the correct coil for a 16 hp Briggs engine, you can refer to the engine's model number, which is usually found on the engine's identification label. You can then consult the Briggs & Stratton parts manual or website, where you can input the model number to find the specific ignition coil part number. Additionally, checking with local small engine repair shops or authorized dealers can provide confirmation and assistance in sourcing the correct coil.
No, the valve settings on a Briggs and Stratton 16 horsepower engine are not the same for both valves. Typically, the intake and exhaust valves have different specifications for clearance. It's important to refer to the engine's specific service manual for the correct valve adjustment settings to ensure optimal performance.
0.004" would be correct. See the YouTube link attached below for the procedure.
Even though an Intek is not shown, it would be the YouTube video below.
20 oz. when bone dry, but only about 16 oz. will come out during an oil change.
20 oz. if fully drained, 16 oz. will usually be used in an oil change.
The float valve is probably stuck open.
No serial number provided.
No serial number provided.
You need to supply the model number and serial number to get a answer.