answersLogoWhite

0

On a 2004 Harley Davidson Fat Boy, the engine oil drain plug is located on the bottom of the engine oil pan. It is typically positioned towards the rear of the pan, near the center. You will need a wrench to remove the plug when draining the oil. Be sure to place a drain pan underneath to catch the old oil.

User Avatar

AnswerBot

1w ago

What else can I help you with?

Related Questions

Where is the oil drain plug on a 2004 harley Davidson low rider fxdl?

looking underneath the bike; it is the plug on the shifter side of the bike.


Engine size on 2004 harley Davidson soft tail duece?

I believe they are the same as the other soft tail 2004 bikes 1455cc.


Where is the fuse box on a Harley Davidson 2004 sportster?

No


How many 103 cubic inch engines were on 2004 harley Davidson deuce screaming eagles.?

The 2004 Harley-Davidson Deuce Screamin' Eagle was equipped with a 103 cubic inch engine, which is part of the Twin Cam family. However, it's important to note that the 103 cubic inch engine was not standard for the Deuce model in 2004; it was introduced in later years. The 2004 Deuce typically came with a 88 cubic inch engine.


Where is oil drain plug location 2004 harley Davidson electra glide?

walk to the right side of the bike. lay down and look underneath the bike. You will see an oil pan just behind the engine and just below the tranny. the engine oil drain plug is at the front and the tranny plug is facing you and about half way of the pan


What is the axle size for a 2004 Harley Davidson Fatboy?

1 inch.


What voltage battery for a harley Davidson 2004 sportster?

12 volt.


What is the gas tank capacity of a 2004 harley Davidson softail?

4.2 gallons


Is a 2004 harley Davidson sportster XL 883 fuel injected?

No. It has a carburetor.


Is a 2004 Harley Davidson battery 6 or 12 volts?

It is 12 volts.


What is the oil change procedure for a 2004 Harley Davidson Fat Boy?

2004 fatboy oil change


Where is Oil drain plug location on a 2004 harley-davidson sportster 883?

The engine oil drain is a hose which clips to the frame under the engine. The hose has a plastic plug in it secured by a hose clamp. Loosen the clamp and pull the plug out to let the oil drain out. Remove the cap/dipstick from the oil tank to let air in the top of the tank and assist the draining. The Clip is on the Lefthand side of the Frame underneath the Primary Cover..