answersLogoWhite

0

Go to www.Bike Bandit.com , click on OEM parts . It will ask you the make , year , and model, then go to microfish for clutch and get your numbers . Another site is www.babbitts .com.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Does 86 Honda Prelude have clutch cable?

The 1986 Honda Prelude does not have a clutch cable. The 1986 Prelude has a hydraulic clutch instead of the clutch cable.


Does a 1986 Honda shadow have a wet clutch?

Yes, it does.


Where is the horn located on a 1986 Honda goldwing?

Remove the lower ( part of the fairing ) on the left side, ( clutch side ) its in there.


What type of brake fluid does the hydraulic clutch use on a 1986 Honda goldwing 1200 cc?

Just buy it from your local Honda dealer. Just buy it from your local Honda dealer.


Will a 1985 cr 125 Honda clutch cover fit 1986 cr125?

No, the 86 has 7 clutch plate and the 85 has 6 so the 85 clutch cover is not deep enough. I had the same issue


What type of oil goes into a 1986 Honda model trx 70?

i run Valvoline 20w 40w motorcycle for wet clutch


I own a 1986 Honda city cabriolet with a 1.3L cvcc combax engine and a five speed trans where in north America do I find a clutch for this oddity?

You can find a clutch for the 1986 Honda City Cabriolet in North America at many junk yards or auto salvage businesses. LKQ offers a variety of parts for cars manufactured all over the world.Ê


Does a 1986 Honda Shadow use clutch fluid?

not if its the same as my 84 the fluid compartment by left hand is for brake fluid and behind clutch handle there is 2 wires going in means its electric clutch like mine right now im trying to figure out how to adjust it to get more clutch


When you install a clutch in a 1986 Honda prelude does it have a cable that needs to be bled?

If your replacing the clutch you shouldn't need to bleed anything. But you probly should adjust it, I'm prety sure the 86 has a cable clutch, which is easy to adjust. if you happen to have a hydrolic clutch you should bleed it just to make sure.


How do you engage the reverse on a 1986 Honda fourtrax trx200sx?

To engage reverse on a 1986 Honda FourTrax TRX200SX, first ensure the vehicle is at a complete stop. Then, pull in the clutch lever and shift the gear lever to the reverse position, which is typically marked with an "R." Release the clutch slowly while giving it a little throttle to move in reverse. Always remember to check your surroundings before reversing to avoid obstacles.


Where is the clutch sensor on a 1986 Nissan pickup?

on the clutch pedal lever


How do you get a hydraulic clutch on a 1986 C1500 working?

try to bleed the clutch