0
What else can I help you with?
How do you breakdown a ryobi start plus cs30 trimmer?
spark plug is good but when its plug in to coil on spark
Ryobi cs30-what kind of fuel it take?
regular gas you fool
What is the Gas-oil mix for ryobi cs30?
Mine says 50:1 on the gas cap. It's a 2006 CS30. Model #RY30120.
What is the Gas oil mix for ryobi cs30?
Mine says 50:1 on the gas cap. It's a 2006 CS30. Model #RY30120.
How do you string a ryobi cs30 trimmer?
Line up the two arrows on the bottom, remove any excess string, cut two pieces of string about 10 feet, feed line in the side holes, secure line in hole where it comes out the bottom (it only takes about 1/4in. to do so), pull strings tight, then turn counter clockwise. sometimes it sticks a little just pull line a little. (you do not have to take anything apart) Hope this helps. Good luck! To remove the inner spool to remove line that has broken inside, to clean the mechanism, or to perform other maintenance, grasp the outer reel and unscrew the bump knob counter-clockwise. Mine is often very tight and requires pliers to get enough leverage. While you are in there, clean the inner reel and the inside of the outer reel to improve feed performance. The shaft rarely needs cleaning. Do not lubricate. After re-installing the reel, add string (0.080") as described above.
