answersLogoWhite

0

unhook the battery for a few minutes,then reconnect. should work.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

Brake light is on in a Toyota Tacoma?

AnswerIndicator light on dash? Check fluid level in master cylinderMake sure parking brake is fully releasedCheck Brake fluid levelI have a 1996 Tacoma 2.7L and my brake indicator light on the dash is always on. So- here's how to check what's wrong... Start truck, release parking brake, if light is on, push the parking brake handle in/towards dash, if light goes off then you have a bad spring (like my truck does) or the like on the parking brake handle. That's all. Sometimes when I drive, I push it in/light goes off and then the handle works it's way out again and the light comes back on.


One brake light doesn't work?

Start with replacing the bulb.


What years did trucks start having a 3rd brake light?

1986


What does a yellow car light on the dashboard of a Toyota mean?

its a rear bulb failure indicator if it comes on when brake is first depressed it is a brake light bulb if it is on when you start the car it is a ride light or park light


What year did dodge start puting brake light on cab of 1500 quad cab pickup?

The "3rd" brake light has been out since at least 1994.


How do you reset brake pad light on BMW x3?

To reset the brake pad light on a BMW X3, start by turning on the ignition without starting the engine. Then, press the gas pedal three times while holding the brake pedal. After that, turn off the ignition and then start the engine; the brake pad light should be reset. If the light persists, it may indicate an issue that requires further inspection.


You have no brake lights on a 95 golf all bulbs are good where do you start to look for the problem?

try your brake light swtich on the brake pedal and check wires


Why does your brake light stay on 1983 flht harley where do you start looking?

check the play in your rear brake lever, may be too tight and activating the brake light switch. or the front brake lever may be depressing the switch in the control housing. or you have a bad switch. or, when you rewired it, after installing that cool skull tail light, you got the running light wire and the brake light wire backwards. D


Your brake lights don't work you have an 1986 ford crown Victoria what should you check for?

Start with the light sensor on the brake pedal arm.


Why won't brake lights work on 1999 expedition?

Start with: Check fuses, brake light switch (at brake pedal), check for trailer harness problems, check bulbs.


My 91 eclipse has brake light problems the brake lights stay on whether i put my foot on the brake or not. how can i get them to start working again?

Adjust or replace stop lght switch


Why does your brake light stay on 1996 flht harley where do you start looking?

The brake light switch in the hand brake is probably broken or the tab that pushes it is bent. You can also see if your throttle controle is pushed all the way up to the master cyclider.