answersLogoWhite

0

You just buy a carburetor re-build kit, clean all the parts and follow the simple directions to puy it back together. You can doi it, it's just not that hard and beats spending 250 bucks for a new mower!

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Why does your Craftsman 4.5 HP model 917.388040 lawn mower start when priming the bulb but then quits after 2 3 seconds The engine will stay running if continued bulb priming?

Float is stuck , carb need a good cleaning. If you get lucky might get away with a good in tank carb cleaner. Good luck


Why does your Craftsman 4.5 HP model 917.388040 lawn mower start when priming the bulb but then quits after 2-3 seconds The engine will stay running if continued bulb priming.?

The fuel filter is probably clogged. The primer bulb creates enough suction to feed fuel to the engine, but the vacuum created by the piston is not enough to keep the fuel going.


Lawnboy silver series 4.5 hp stops running 2 to 3 seconds after priming?

Make sure it's getting fuel through the carb. if it is mke sure the fuel is getting to the combustion chamber. if it is , then it should be running.


What is the duration of Running the Halls?

The duration of Running the Halls is 1800.0 seconds.


What is the duration of Running in Heels?

The duration of Running in Heels is 3600.0 seconds.


What is the duration of Running Wilde?

The duration of Running Wilde is 1260.0 seconds.


Do cars backfire when running out of gas?

No. They sputter for a few seconds then quit running.


How fast are you running if im running 40 yards in 6.5 seconds?

13 mph


What is the duration of Running Russell Simmons?

The duration of Running Russell Simmons is 2700.0 seconds.


A tiger beetle runs 210 cm in 4 seconds how fast is it running?

he is running 22.8


What is Usain Bolt's Berlin running record?

9.58 seconds


How can you quickly stop a running toilet in seconds?

To quickly stop a running toilet in seconds, lift the lid of the toilet tank and adjust the flapper or fill valve to ensure it is properly sealing.