0
Wrong size jets...possibly. Otherwise this answer could not be further from the truth. Most likely cause is that you are running lean (not enough fuel/too much air). This could be caused by the wrong size jets, but if you have not changed them, I would look elsewhere. A clogged fuel filter could be to blame. That would be the first place to look. Next I would look for a leak around the joint from the carb to the engine. Spray starting fluid...or WD-40 around the joints and listen for a change in engine RPM. This would indicate a leak. Then I would check the carbs. I don't know how much adjustment can be made to yours, but mine allow for none. You might just have to rebuild the carbs...but the problem is NOT a flooded carb. Happy hunting.
there`s unburned gas in the exhaust sounds like the carb flooding or has the wrong size jets
What else can I help you with?
Where is the spark plug on 2000 Yamaha warrior?
It should be under the gas tank or slanted above the exhaust pipe on the front of the motor.
What is the stock diameter on a 1999 Yamaha warrior 350 exhaust pipe?
The stock diameter of the exhaust pipe on a 1999 Yamaha Warrior 350 is typically around 2 inches (50.8 mm). This size is standard for many ATV exhaust systems of that era, designed to balance performance and noise levels. If you're considering aftermarket modifications, ensure compatibility with the stock dimensions for proper fitment.
Where is the exhaust restrictor located on a Yamaha PW80?
The exhaust restrictor is located inside the exhaust pipe where it comes out of the head.
Where is governor located on Yamaha pw50?
inside the exhaust pipe. remove pipe to find washer(aka governor) in head pipe.
How do you unrestrict a 50cc Yamaha vino?
remove exhaust pipe from head , and leave the washer out thats at frt of the pipe.
Can you join a fmf power pipe to an original exhaust for a Yamaha blaster?
yes my mate has1
How do you remove the heat shield on the exhaust pipe of a 2003 Yamaha v-star?
To remove the heat shield on the exhaust pipe of a 2003 Yamaha V-Star, first, locate the screws or bolts securing the heat shield in place. Typically, these will be a combination of Allen or Phillips screws. Use the appropriate tools to carefully unscrew them, taking care not to damage the shield or the exhaust pipe. Once all fasteners are removed, gently slide the heat shield off the exhaust pipe.
How do you change an oil filter on a 2005 Yamaha v star classic?
drop the front exhaust pipe ,remove cover behind pipe ,filter is in there.
How much would a 2005 Yamaha blaster with fmf exhaust and pipe Nerf bars and new tires be worth?
it would be about 4,000 dollors anthony
What causes backfire from exhaust pipe?
Unburned fuel in the exhaust system causes the backfire from the exhaust pipe.
Where is catalytic converter on a 1998 mercury mystique?
In the exhaust pipe, near the engine.In the exhaust pipe, near the engine.
What is the best exhaust to put on a Yamaha blaster?
Just saw off the muffler, rejet, and run an open pipe. You'll be the parking lot donut king!
