A lack of spark on a Suzuki 250 ATV can be caused by several issues, including a faulty spark plug, a malfunctioning ignition coil, or a problem in the wiring or connections within the ignition system. Additionally, issues with the CDI (capacitor discharge ignition) unit or a blown fuse could also lead to no spark. It's essential to systematically check each of these components to diagnose the problem accurately. Regular maintenance and inspection can help prevent these issues from occurring.
lt230 no 250
Yes
spark gap is 0.28mm.
The 1991 Suzuki 250 dirt bike spark plug gap is .019. Most spark plugs will come pre-gapped from the spark plug manufacturer.
The spark plug gap setting for a 2001 Suzuki RM 250 should be set at .024 inches. This is equal to about .6 mm.
The spark plug gap for a Suzuki RMZ 250 K6 should be set at .024 inches. A new spark plug will already be preset and should not need to be adjusted.
eBay
To change the spark plug on a Suzuki ATV, first, ensure the engine is cool and disconnect the spark plug wire. Use a spark plug socket and ratchet to remove the old spark plug by turning it counterclockwise. Inspect the new spark plug for proper gap settings, then install it by hand to avoid cross-threading, followed by tightening it with the socket. Finally, reconnect the spark plug wire and ensure everything is secure before starting the ATV.
carb issues
The spark plug on a Suzuki King Quad 700 ATV is located on the engine's cylinder head. To access it, you typically need to remove the plastic cover on the left side of the ATV. Once the cover is removed, you'll see the spark plug wire leading to the spark plug, which is situated near the front of the engine. Make sure to use the appropriate tools to safely remove and replace the spark plug.
I believe it is a clone engine of the Suzuki gn 250 motorcycle! Cdi units on the gn 250 and the xtreme 300 atv r identical!see for yourself! Check a picture and specs of a 1985 Suzuki gn 250 motorcycle!
I am not 100% certain, and I am no mechanic; However, I have always used 0.028" on my 1996 Suzuki King Quads with no problems.