Yes, a 2014 Harley Davidson V Rod Muscle rear fender and seat will generally fit onto a 2014 Night Rod Special since both models share the same platform and frame design. However, minor modifications may be needed for proper alignment or fitment, especially concerning mounting points and aesthetics. It’s always recommended to check compatibility and consult with a professional before proceeding with any modifications.
Front fenders for Harley Davidsons, as well as other parts, can be bought directly from Harley Davidson dealers or from from Harley Davidson's website. You can also find them on major online retailers like Amazon or eBay.
It's under the seat and bolted to the rear fender.
It is underneath the seat mounted on the rear fender........
Remover the socket head cap screws from the fender struts and remover the tail light/ turn signal wiring from the tabs underneath the fender and you should be home free.
Harley part number 65913-06B refers to a chrome front fender for various Harley-Davidson models, designed to enhance both aesthetics and protection. Part number 66080-06B is a chrome rear fender, also intended for specific models, providing a matching look and improved durability. Both parts are commonly used in customization and restoration projects for Harley-Davidson motorcycles.
The main (30 amp) breaker is located on the plastic rear fender extension, toward the right side.
Usually under the seat against the back fender. Sometimes down behind the battery on a plate in front of the back wheel.
Unscrew the rear chrome screw on top of fender and a screw on left and right side of seat and pull up and back and remove.
it has 3 auto-reset breakers behind the battery on the front of the rear fender where the starter relay is, no fuses unless you have heated grips, vest etc.
Unplug the front fender tip light (if applicable on your Road King model) and loosen the nuts on the four allenhead screws that hold the fender to the fork sliders. Carefully remove the four screws while supporting the fender, then lift the fender up and out from between the fork sliders. To prevent scratches you might want to tape rags to the bottom of the fender, which is the widest part.
Depends on the model, Softail is on the rear fender under the seat. Sportster is on the back side of the ignition module Dressers are in a slot at the back of hte battery box.
No, they are better.