The tank may rust over long periods where it is not covered by fuel, especially over the winter period where the changes in temperature causes condensation inside the tank, depending where the dent is try and keep it topped up with fuel covering the dent - it is always wise to fill a tank to the brim when storing over winter, if you use it over the winter months then there shouldn't be a problem.
When a tin can is dented and the tin layer cracks, the underlying steel is exposed to the air. This can lead to oxidation of the steel, which forms rust. The reaction between the steel and oxygen in the air causes corrosion, weakening the can and reducing its ability to protect the contents inside.
Because blood doesn't rust.
It is possible for the LCD Wall Mount to rust if exposed to outdoor weather, but if it is kept inside it shouldn't rust.
if theres rust on the inside it means it wasnt sealed properly and oxygen got to it so its bad toss it
Sure, inside the shuttle.
water
They can rust out inside and just be a hollow tube. The neck on the ends can rust off.
the tank needs to be removed. There are various kits that can clean the rust and scale from the tank. Some people use cleaned marbles or pebbles and shake them inside the tank as well to beat even more scale out. The tank needs to be chemically sealed to stop the rust and keep what's left from mixing in with the fuel.
Consuming water from a kettle with rust inside can pose potential health risks due to the ingestion of rust particles, which may cause stomach irritation, gastrointestinal issues, and long-term health problems if consumed regularly. It is recommended to avoid using kettles with rust inside and to replace them to ensure safe drinking water.
To remove rust from inside a drain pipe, you can use a commercial rust remover designed for plumbing applications. Make sure to follow the manufacturer's instructions carefully. Alternatively, a mixture of vinegar and baking soda can also help break down rust deposits in the drain pipe.
1. cut the rust out maybe a inch more than the rust. 2.weld or fiberglass medal to the hole 3.bondo and finish with puddy. 4.sand smoothly and primer it
To effectively remove rust from inside a tea kettle, you can try using a mixture of vinegar and water, or a commercial rust remover. Simply fill the kettle with the solution, let it sit for a few hours, then scrub the rust away with a brush or sponge. Rinse thoroughly before using the kettle again.