Yes, but expect tuning issues. Change the cams as well. ignition timing? all have to be considered. not a bolt on solution. Go to Randal Randakk's GL1000 site he is the expert on carburetors for all GL1000 http://www.randakks.com/
Honda Goldwing Gl1000 and gl1100 Motorcycle
DT6 has one carb, DT8 has two carbs. Same carbs, but different jetting. Fit is the same, but the jets are different.
Can a 22Rcarburater fit a 1979 toyoda pickup .
1979
Yes, a 1979 Firebird tail light will fit a 1979 Trans Am. There are also restoration services if you have the tail lights and they just need to be repaired.
Yes you can fit 20" rims on you 1979 cutlass, if you wanted to you could fit 22" rims with low profile tires with the stock springs.
No they can't, due to the fact is the distance between the Rf400 carbs are closer together. The rf400 carbs will fit the older gsxr400 gk73a as the share a simulare cylinder head. Also the rf400 carbs are 32mm and the gk76a carbs are larger. hope this helps regards Martin
GL1200 shocks are about 3/4in longer than the GL1100 shocks. Putting them on a 1200 will lower the rear slightly. I'm not sure about the air connections or the mounting bolt size.
Will a 35 inch tire fit on a stock 1979 F250 4x4
will a 1973 ford f-2504x4 chassis fit a 1979 f-250 4x4
Katana and GSX-R models have different carburetor setups, so Katana carbs typically will not fit GSX-R models without modification. Additionally, the tuning and performance characteristics may differ, which could affect overall performance. It's essential to check specific model compatibility and consider potential adjustments for proper fit and performance.
no. but it will fit on a garbage truck