Try cleaning with saddle soap and then a good leather conditioner
* Try WD-40. Here is a short list of what WD-40 does for leather. * Spray old leather shoes and the leather will become soft and pliable * Removes glue from leather * Removes paint from leather * Removes coffee stains from leather * Removes ink stains from leather * Soften stiff leather sandals * Softens stiff leather sandals * Helps break in leather gun holsters * Lubricates leather gasket of Coleman stove * Removes stiffness from dried out leather gloves * Softens stiff leather dog collars * Stop squeaks caused by new leather work boots
New leather gear is stiff and squeaky. It will soften with wear, but it takes a long time. You can try rubbing in mink oil or some other leather dressing to soften it up. Sometimes it will soften a bit if it's damp--not wet. In the short run, you can force the end through the buckle with pliers, but be careful not to mark the exposed portions. Some rubber tubing places over the ribbed portions of the plier jaws will help protect the leather.
The leather dried stiff and hard. She had a stiff, formal demeanor.
To soften leather work gloves, you can apply a leather conditioner or mink oil, which helps moisturize and break down the stiff fibers. Gently massage the product into the leather, focusing on high-stress areas. Another method is to wear the gloves while performing tasks, as the natural oils from your hands will also help soften the material over time. Always test any product on a small, inconspicuous area first to ensure it doesn't alter the color or texture.
Not permanently. But they be stiff for awhile until you get the leather loosened up again. Rub in some leather conditioner after the jacket is completely dry. Dry it slowly. If you periodically condition the leather in normal use the effects of the rain will be a lot less
Most saddles can be softened through regular use. However, if this doesn't work after a couple of weeks, it may be best to oil the saddle, to soften the leather. It the saddle is old and used to fit the horse, but has sunk and hardened, it may be best to re-flock the saddle (put in new foam to lift the saddle) so that the saddle fits correctly. For this, it may be best to call in someone with experience and this can be quite fiddly.
To break in stiff hiking boots for maximum comfort on the trails, try wearing them around the house or on short walks to gradually soften the material. Use thick hiking socks to prevent blisters and consider using a boot stretcher to help with tight spots. Additionally, applying a leather conditioner can help soften the material and improve flexibility.
Soak them in warm water for some time and then once dried use a bowling ball to roll over them to resoften them as they will get stiff once dried place a light piece of cotton over them before rolling the bowling ball on then as not to mar the surface.
it matters what kind of belt you get a replica or comm. a comm.belt is made of some type of hard plastic and stiff leather a replica is made of metal and stiff leather
To soften a stiff suede coat, gently brush the fabric with a soft suede brush to remove any dirt or debris. Then, apply a suede conditioner or a specialized leather conditioner sparingly, working it into the material with your fingers or a soft cloth. Allow the coat to air dry away from direct heat, and repeat the conditioning process as needed to achieve a softer feel. Avoid soaking the suede, as excessive moisture can damage the material.
No, it is not possible to make soft foam stiff again.
it matters what kind of belt you get a replica or comm. a comm.belt is made of some type of hard plastic and stiff leather a replica is made of metal and stiff leather