To check the coolant on a Suzuki 800 Intruder, locate the coolant reservoir, typically positioned near the right side of the bike, near the engine. Ensure the engine is cool, then inspect the coolant level through the transparent reservoir; it should be between the "low" and "full" marks. If the level is low, add the appropriate type of coolant as specified in the owner's manual. Always check for any signs of leaks or damage in the cooling system.
Tire pressure 1993 800 intruder suzuki
Intruder 800 parts
.031...From the 1996 Intruder 800 manual, .8-.9MM, which is more like .035.....
Do you mean which coolant is used in Maruti Suzuki 800 or is it used? If you question was "Is a coolant used in Maruti Suzuki 800". Then my answer is yes.
Approximately 52 hp
The crankcase vent on a 1996 Suzuki Intruder VS 800 is located along the side of the engine. It allows vapors to escape from inside the engine.
To check the oil level in your Suzuki Intruder 800, first ensure the motorcycle is on a level surface and the engine is off. Locate the oil sight glass or dipstick, usually found on the right side of the engine. If your model has a dipstick, remove it, wipe it clean, reinsert it without screwing it in, and then check the level. If using the sight glass, simply look for the oil level indicator; it should be between the minimum and maximum marks.
The fuse box diagram for a Suzuki 800 Intruder Volusia is available in repair manuals, such as Haynes. These types of manuals are available at major auto parts and book stores.
The front fork tubes in a 1996 Suzuki Intruder VS 800 are 40mm.
About .035 iches
14oz per fork
underneath the seat where it meets with the bottom of the tank