0
What else can I help you with?
What is the relationship among voltage current and resistance in a circuit?
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Vacuum is 1100 watts how many amps is that?
If running at 110V, that is 10Amps. Wattage = Voltage x Current Current = Wattage / Voltage - Neeraj Sharma
How will you describe the graph of resistance against current?
If resistance is high that time the current flow is low. Bcoz current always flow through the low resistance path.
According to Ohm's Law how is voltage related to resistance and current?
1). Voltage = (resistance) x (current)2). Current = (voltage) / (resistance)3). Resistance = (voltage) / (current)I think #2 is Ohm's original statement, but any one of these can be massaged algebraicallyin order to derive the other two.
If a toy car with a resistance of 2 ohms is connected to a 3v battery how much current flows through the car?
Ohm's Law: V = IR (voltage = current times resistance).Ohm's Law: V = IR (voltage = current times resistance).Ohm's Law: V = IR (voltage = current times resistance).Ohm's Law: V = IR (voltage = current times resistance).
At 110v what body resistance would allow the lethal level of shock current to flow?
well, it depends on the individual. IIRC, 240volt Residual Current Device (AKA ELCB) designed to protect life operate at 60mA which requires a 'simple' body resistance of 4000 ohms. However, this doesn't take account of AC resistance (includes capacitive and reactive impedance) which is dependant on frequency! So, at 110v DC (you don't mention AC or DC voltage) a body resistance of below 2000 would result in a potentially lethal current ... I wouldn't want to test it however - I've had two 240v AC shocks and, to be honest, that's enough. I've 'felt' 110v AC 60Hz and also 110v AC 400Hz - the 400Hz definatly cought my attention .....
In a circuit is current proportional to resistance?
Ohms law is: I = V / R (current = voltage / resistance)... where if the voltage or resistance changes then the current will change. ... the current and resistance is a inversely proportional linearly relationship ...this means that if the resistance doubles then the current halfs, if the resistance halfs then the current doubles, etc...hope this helps
What change occurs on current when voltage is in a circuit is constant and resistance gets double?
Ohms Law: V = IR (or equivalently, I = V/R) if voltage is held constant, then when resistance goes up, current goes down, and vice-versa. Say for instance, the voltage is 10 Volts, and resistance is 5 Ohms. That means the current is 2 Amps. (2 = 10/5) If the resistance is raised to 10 Ohms, then the current drops to 1 Amp. (10 = 10/1)
Can you plug two appliances a 120v and a 110v on the same line which is a 110v?
Should be ok provided you do not draw too much current.
In a circuit diagram the resistance is 100ohms and the current is 0.1 amperes?
10
How much current would an applied voltage of 10 volts cause through a resistance of 5 ohms?
10 volts applied to 5 ohms would cause a current flow of 2 amperes. Current = voltage divided by resistance.
A 10 volt source current resistor at 21.3microA what is the valve of the resistance?
469.4 * 10^3
What is the relationship among voltage current and resistance in a circuit?
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
What is a relationship among voltage current and resistance in a circuit?
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
What is the resistance of a clothes iron that draws a current of 12A at 120V?
By Ohm's Law Voltage = Current x Resistance R = V / I = 120 / 12 = 10 Ohms
If a toaster is plugged into a 110 volt outlet what is its resistance if the toaster draws 10 amps?
I believe its like this but don't take my word for granted: R (resistance) = V (voltage) / I (amperes) The formula is R = V/I R = 110V / 10A R = ? R = 110/10 = 11 R = 11Ω Ω= omhs Hope this helped but as I said I'm not completely sure
What is the resistance of a circuit with 120V and 10A?
Assuming DC and resistive loads, resistance equals voltage across the load, divided by the current through it. In this case 120/10 or 12 ohms.
