0
very high value
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Is the Jersey boys movie accurate?
As with all movies there are some facts in it. It must be remembered that the movie is made for entertainment purposes. Script writers take liberties to make the movie more entertaining.
What happens when voltmeter is connected in parallel?
An ideal voltmeter has infinite impedance(resistance). If you were to break the circuit and put it in series and try to make a measurement, it is easy to see that the circuit would act completely differently and your measurement would be wrong. An ideal ammeter is always connected in series because it has 0 resistance, so all of the current would flow through it, and not through the wire that you are trying to measure the current of.A better answer though is to think about what you are trying to measure. When you say something is 3 Volts, that is a difference between the voltages at two different points. If you want to see what the voltage drop across a resistor is, for example, you need to put one probe of the voltmeter on one side of the resistor and the other probe on the other side of the resistor. That setup is simply called being in parallel.Voltage is potential difference between two points, hence measured across or in parallel, where as current is measured in series since current flows (*)
How voltage gets converted into current in an ammeter?
A: It must be be understood that current needs voltage other wise it is zero. An ammeter for DC is always a voltmeter that reads small IR drop to convert that reading into current present. Like an ohmmeter needs volts to read ohm. Both reading are volts it just convert those reading into whatever scale is switch to.
How did they measure the height of mountains in 1910?
Simple geometry and using triangles can tell you the height and location of any point on earth with surveying techniques
Must get here Must get here Must get here?
The three musketeers
What is the use of universal high resistance voltmeter?
A voltmeter must have a very high resistance to measure voltage. A voltmeter is placed in parallel with the element that you are measuring. If the voltmeter has a low internal resistance, then all of the current will flow through the voltmeter instead of the element. You want all of the current to flow through the element, to get an accurate reading of the voltage. Conversely, an ampmeter must have zero resistance, because it is placed in series with the element.
Why must voltmeter be connected in parallel with the circuit component?
Because, by definition, a voltage is the difference in potential between two different points. So the voltmeter must be connected across those points in order to measure that voltage -i.e. in parallel with the points.B
Why do you get different results when calculating the voltage drop across a resistor and ignoring resistance of a voltmeter and when considering it?
Voltage drop is the product of current and resistance. When you connect a voltmeter across a resistor, you are connecting that voltmeter's internal resistance in parallel with that resistor. The resulting resistance of this parallel combination is lowerthan that of the resistor. As a result the voltage drop (current times this lower resistance) will be lower than it would be without the voltmeter connected. This is called the 'loading effect' of that voltmeter.The higher the internal resistance of the voltmeter, the less effect it will have on lowering the overall resistance when connected across a resistor. This is why the internal resistance of a voltmeter is made deliberately very high. Under most circumstances, therefore, a conventional voltmeter will have very little effect on the resistance of the circuit being tested and, so, it will have no significant effect on the voltage appearing across the resistor.However... for circuits that already have exceptionally-high resistance values, you must be careful when you select a voltmeter as you must take into account its internal resistance and ensure the voltmeter you use has the very highest internal resistance available. This is because the loading effect increases with circuits that have a high resistance. That might involve selecting a voltmeter that works on a completely-different principle , such as an electrostatic voltmeter or, perhaps, an oscilloscope
What is the function of the voltmeter in an electric circuit?
A voltmeter is a device to measure the voltage in a electric circuit, and must have be connected in parallel to it.
How you can do Calibration of voltmeter by potentiometer?
A: The only calibration that a potentiometer is allow to do is on the resistance scale. The reason being is the internal battery looses capability with age so to compensate the pot. will change current available to make the ohmmeter to go to zero when the probes are shorted. To test a volts range then an accurate voltage must be used to verify calibration.
Which voltmeter will used for measuring 50kv dc?
Any standard voltmeter but however the voltage to be measured must be stepped down to a safe value using a Potential transformer.
Where must a voltmeter be placed in a circuit?
One does NOT insert a voltmeter in a series cirtcuit...an ammeter can be inserted in series, though. A voltmeter is connected in parallel with the source voltage and low(ground) side.
Why does voltmeter have high internal resistance?
No, ammeters have a low internal resistance. This is so that when they are put in series with a circuit, they change the circuit's operating characteristics as little as possible.Contrast this with voltmeters, which do have a high internal resistance, and which are intended to be placed in parallel with the circuit they are measuring.Use the link below to the related question on why ammeters have a low internal resistance and read through that information to see why things are the way they are.
Which electrical device must have high resistance in order to function properly?
voltmeter
The rules of connecting voltmeter and ammeters in the circuit?
Connect ammeter in series and voltmeter in parallel to the circuit
To measure voltage drop across a component or connector the voltmeter must be connected in?
it must be connected in parallel as always
Can you measure the emf of a cell with a voltmeter?
you can, but you will not get accurate answer as voltmeter consumes some current. so, potentiometer is used instead to measure emf ---- the potentiometer must be set to the expected emf from the cell before you put the zero detector in circuit if its set too high it will charge the cell too low it will load the cell perhaps if you dont know the voltage of the cell before you measure it you should get a hi impedance voltmeter(electrometer) to set the potentiometer as close as you can manage before you connect the zero detector
