0
What else can I help you with?
Will 9v 300mA power adapter work with a 9v 700mA device?
No, the adapter's power output has to be equal to or greater that the current draw of the device.
How does a power adaptor work?
it converts AC line voltage to DC low voltage. at first by transformer it setps-down the voltage then it rectified by bridge rectifier ckt. by this there is rippled DC output is there. then is this fed to filter circuit to filter the ripples and its given to regulator circuit to produce fine and smooth pure DC voltage. nowady SMPS (switch mode power supply) is use rather then older iron core transformers. SMPS have plenty of advantages over the Linear power adaptor. :))
What is the main function of a power supply unit?
The name tells you - it supplies power to the device it is part of.
Which power source directs these lost electrons through an electronic device to give it power?
A Battery.
How do you troubleshoot the uninterruptible power supply?
To trouble shoot a device the problem with the device has to be stated. With a UPS the first thing to check is the batteries.
Can you use a 300ma power supply in place of a 400ma supply?
Yes, you can use a 300mA power supply in place of a 400mA supply, but it may not provide enough current for the device to operate properly. If the device requires 400mA and only receives 300mA, it may underperform, malfunction, or even be damaged due to insufficient power. It's important to ensure that the power supply meets or exceeds the current requirements of the device for safe and effective operation.
Can you power a 9v 700ma device with a 9v 300ma adaptor?
No. The device will try to draw 700 milliamps which will overload the 300 milliamp adapter most likely causing it to burn out and possibly catch fire.
Can you use a 300mA adaptor on a 1A device?
Yes, you can use a 300mA adapter on a 1A device, but it may not work properly or could damage the adapter. The device may draw more current than the adapter can provide, leading to insufficient power, potential overheating, or failure of the adapter. It's always best to use an adapter that meets or exceeds the device's current requirements for optimal performance and safety.
What will happen if use a 12v 400ma instead of 12v 500ma?
i am not sure, BUT according to the answer in this post:Can_you_use_a_9V_600mA_adapter_on_a_9V_400ma_scanneryou need an adaptor of 9v and AT LEAST 500mA (assuming that the appliance draws 500mA)
Will 9v 300mA power adapter work with a 9v 700mA device?
No, the adapter's power output has to be equal to or greater that the current draw of the device.
Can you use a 9v 300mA adapter on a device that requires a 9v 400mA adapter?
No. The voltage rating is the same, but the lower current rating on the 400ma power supply might cause the voltage to drop way below 12 volts, and on some devices a lower voltage than it is rated for will cause it damage.
Can you safely use a universal AC adaptor set for 9V 300mA for a game that requires a 9V 700mA?
No, a power adapter must supply the same voltage, same polarity, and at least as much current as the load requires. Your adapter can only supply 300mA, which is less than the 700mA required by the load.Your game probably will not turn on and the power adapter may be damaged.
Can you use 5v 1000ma adapter on a 45v 400ma device?
No you can not. The power supply output of 5 volts is under sized. There is no way that a 45 volt device would operate from it. You will need to find a power supply of 45 volts.
Can you use a 9v 600Ma adaptor to power a 9v 300Ma appliance?
I think you mean to ask if one can use a 9v 600mA adapter to power a 9v 300mA appliance. Yes, you can do that. A 9v 600mA adapter will deliver 9v at up to 600mA. A mA is one milli amp, or one thousandth of an amp. 300mA is 300 thousandth of an amp, 300/1000 or 0.3 amps. 600mA is 600 thousandth of an amp, 600/1000 or 0.6 amps, and is twice the current of 300mA.
What will happen if use a 12v 500ma instead of 12v 300ma?
Using a 12V 500mA power supply instead of a 12V 300mA power supply will likely be fine as long as the voltage matches, but the higher current capacity (500mA) means the power supply can deliver more current if needed by the device. The device will only draw the current it needs, so having a higher current capacity power supply should not cause any issues.
What does a ac adaptor model ua- 1506c imput 120v do is it a chargwe?
The UA-1506C is an AC adaptor designed to convert 120V AC power from a wall outlet into a lower voltage DC output suitable for powering or charging devices. While it may be used for charging, whether it functions specifically as a charger depends on the device it is intended to power. Always check the device's requirements to ensure compatibility with the adaptor.
Will 6v 300mA power adaptor work with a 6v 500mA device?
Most probably you are using a AC (117V or 220V) to DC 6V converter adapter. If yes, then the answer is no, you cannot use a lower current rating for a device that draws more current. If you plug in a device that needs DC 6V 500 mA to an adapter that can only supply DC 6V 300mA, then the adapter could start sending higher than 6 volts current which may damage your equipment or overheat the adapter. If you are using a higher mA rating adapter, then it's okay. For more technical details, see: http://www.jaycar.com.au/images_uploaded/plugpack.pdf
