You can but it will only work in IR mode. I have provided instructions on how to program the remote to the AUX button. These instructions will only work with the 722 and 922. It is also used only if you want 1 remote to control 2 different receivers.
Program Remote to Receiver > via Aux ModeYou can use one DISH Network remote to control two different receivers. The second receiver must be programmed into the AUX mode, and will only operate the receiver in IR.
1.
Press the SYSTEM INFO button on the front panel of your receiver
The "System Info" screen should display
2.
Press and hold the AUX mode button on your remote
All four mode buttons should light up
3.
Press 3 and then enter a number between 1 and 15, using the number pad on your remote
The AUX button should light up
4.
Press the POUND (#) button
The AUX button should flash 3 times
5.
Press the RECORD button
If the steps are successful, the number entered in Step 3 should display on the "System Info" screen
6.
Select "Done"
Thanks.
If the batteries in a remote are dead, the only result is that the remote control won't work. It won't in any way affect the operation of the device that it controls. If the converter box is in standby, then the remote won't turn it on if it has dead batteries. If the converter is on, then it should keep operating as you would expect it to if the remote control isn't being used.
Call Verizion , you will have pay more money to receive the HD program's.
costwwise
ge
What is the remote code for an Evolution DMS 1004HD-CA Set top box
How do I get replacement remote control
Most boom boxes, no matter the brand, have remote controls that come with them.
A digitally enabled remote control is compatible with a DTV box.
The ORIGINAL Idiot Box!
You can always use a store-bought remote control, but you may lose some features of the cable remote.
Yes by using the buttons on the Sky box!
For V+ box with Black Remote try: 0514 (as suggested by V+ box) or 0398 or 0065 Good luck
remotes that are built for cable boxes like the cox remote is a universal remote control. although this is a universal remote, it normally will only work with cox digital converter cable boxes. therefore if the digital converter box that you want to control is from cox or motorola (or similar supported affiliate of cox) then pressing the CABLE button will control that said digital converter box. The AUX button will normally not control another digital cable box, because the manufacturer figures that the only converter STB that you will be using is theirs. thus, the CABLE button is only set for their STB. Normally to control weird or unpopular digital converter boxes - universal remotes are recommended. there are many brands, but make sure you find a learning universal remote. so in case the digital converter box code is not in the universal remote (like in the cox universal remote) then you can program it in yourself - hence the term "learning remote" i picked up a ton of these last year for christmas for everyone in my family because they were dirt cheap and most ppl watch tv. so a universal learning remote for everyone was convenient & cost efficient for the state of the economy last year. i posted a link of where i got mine from, but there are many on the market. find what you like & purchase it, but make sure its a learning universal remote.
Check this; RCA RCR503BR Universal Control
I used 067 for a Jumbo Universal Remote...you could try that.
If the batteries in a remote are dead, the only result is that the remote control won't work. It won't in any way affect the operation of the device that it controls. If the converter box is in standby, then the remote won't turn it on if it has dead batteries. If the converter is on, then it should keep operating as you would expect it to if the remote control isn't being used.
I need code remot control directv box Model DSX-5500