This is from the German User Manual:
http://www.klimafirstklaas.de/fileadmin/Daten_www.klimafirstklaas.de/Klimageraete/Anleitung/Bedienungsanleitung.pdf
Used translate.Google.com to make is understandable
Added some possible alternative translation suggestions in [square brackets]
2. Steering: [Installing, operating]
1) Please remove the transparent film of 9V and 1.5V batteries [and install them].
2) Please hold test button for a few seconds, it should now hear a signal to be (test signal). When the signal rings, please release the button (which will sound for about 1-2 times and then stops automatically).
If this test run is completed, this indicates that your wireless smoke detector is working.
3) Networking Smoke Alarms:
Choose one of the Smoke Alarms as a "main smoke alarm." Press please
briefly the LEARN button, the indicator will turn green (There are two LED colors, green or red.).
Press the LEARN button again, and now the previously green indicator turns red
This indicates that the "main smoke alarm" function is now complete.
a) Choose an additional smoke detectors as a "subordinate smoke alarm" and press the LEARN button repeatedly [ continuously??] until the Learn LED lights red. Then press and hold until the "Test" button of the main smoke alarm to give both smoke alarm, the red LED goes out, the light of the Subordinate Detector is now out.
This shows that the networking function is completed. The connect
Application is now complete.
How many smoke alarms can be arbitrarily connected will. [Probably means that Any number of Smoke Detectors can be interconnected]
b) Repeat Section 3. a) for other "subordinate smoke alarms" .
4) Voting Test:
Push the test button of any smoke detector. The alarm will sound and the red LED lights.
All other networked smoke detectors also give an alarm and the green LED indicators for each light up.
First you must have an internet service . If that service does not come with wireless you must purchase a wireless router. Once you have WiFi capability in you home, go to network setting on your setting menu, when the system sees it is not able to connect with an ethernet cable it will start searching for your wireless signal. If you have problems connecting the PlayStation network has many trouble shooting hints for the different possible problems that arise. A link has been added under the related links
No, all PS2 games need a wired ethernet connection. PS2 does not have a wireless setting.
Yes you can if you have access to a wireless internet connection. The wireless connection or wired connection can be made if you have an internet connection and you can purchase a connection without a computer. However in general most locations (For example homes) without a computer do not have access to an internet connection. You will know if you have a wired connection because you are paying for it every month. For a wireless connection you may live close enough to a free wireless provider. Go to setting on your play station and at the bottom of the choices is one for network connections. After you click that try to set up an internet connection. The PS3 will search for wireless connections in the auto mode choice that will come up after the machine determines that you do not have a wired connection. Even if the search finds a wireless connection you may not be able to access the connection without a password, however if you can then you have set a up connection to wireless internet.
All the ads showing features for the PS3 state Online connectivity requires broadband internet service and network devices such as a DSL or cable modem. Most people who have this also require a router and an ethernet cable or a wireless router to allow connection of more than one device to there internet service. Once the PS3 is connected with an ethernet cable or you have a wireless router then you go to the PS3 main menu settings and then the Network setting then network connections. If you do not have the internet you can not set up a wireless connection just because the PS3 has wireless, unless you use someone else's wireless signal
The setting i..
Setting Up dial Up connection By using CDMA Wireless modem?
login to your wireless rounter by enter the rounter IP in browser. there should have a wireless setting. and there you can change the channel.
Consumer's best security is WPA2 AES.
A Wireless router is a device that performs the functions of a router but also includes the functions of a wireless access point and a network switch.
You will need the cabl modem provided by your Internet Service Provider and a wireless router. The wireless router contains simple instruction for setting up the wireless network.
configure setting to wireless N
It is not required, no.
Yes. you can connect in the setting menu
ipconfig
You can find instructions on setting up a wireless router if you search it up. There are also how-to videos online. How-to websites should also have instructions for this as well.
It is a setting that stops phones from sending wireless signals so that you can still use them while on an aeroplane.
i. Setting up the access point as an access point - The Access Point mode is the default setting of most Linksys wireless access points. It allows you to extend the range of an existing wireless signal by connecting the access point to a wireless router via Ethernet connection.