Want this question answered?
Tyrants in Therapy - 2001 Read My Lips 4-1 was released on: USA: February 2004
MICR codes are used to identify bank and account information. The codes are read by machines, offering a quicker and easier process for the clearing of checks.
Felix left early in season 2 to enter the International Troops in Staad.
on drivers side under the dash behind fuse block
You need to have someone read out the code. there are 849 general codes and several hundred make-specific codes. Any garage will have an OBD-2 reader (if vehicle is 1997 or later) , but they'll charge you. You can pick one up at checker/kragen for about $100 and never pay to have it read again. Believe me, you will save the cost of the unit in about a month, and also help out your friends and neighbors.
Perhaps there are no codes set to read.
Read the codes. Then fix the problem. Autozone will read the codes for you for free.
Take it to Auto Zone and they will read them free.
read my answer to reseting engine codes below...2001 olds silhouette..
A scan tool or code reader is required to read the trouble codes on a 2001 Chrysler Town and Country.
YOU CAN"T. Engine must be scanned
The OBD2 system will not BLINK codes for you. It requires a engine scanner to read the codes. HAVE ENGINE SCANED. Some parts stores will do that for free.
CHECK OWNERS GUIDE
You need a scan tool. Most "Autozone" type parts stores will read codes for free.
You can purchase a scan tool from your local auto parts store for under $100. This tool will read the codes and erase them. You need to read the codes and make necessary repairs then clear the codes to eliminate the light. Some parts stores will read the codes for you at no cost if you purchase the parts from them to make repairs.
With a code reader that plugs in under the drivers side dash.
If there is something wrong with the engine, a person can find out by scanning it for codes. A scanner can be bought and the codes read by the owner or they can take the vehicle into a shop.