0
You probably shouldn't. If you couldn't find this information on your own, you're almost certainly going to muck it up and ruin the controller.
However, on the off chance you're really an electronics wizard who has somehow mysteriously never heard of Google, check out the related link.
Note: I have not personally tested this; I cannot guarantee that it will work even if you follow the instructions precisely.
What else can I help you with?
How do you install a bass blocker?
You tap into the positive speaker wire and attach the bass blocker to that. So there will be wire then bass blocker, then more wire, and speaker. It takes about 5 minutes if you know how to cut/strip/connect wire.
How does kyle xy not have a belly button?
the belly button is somewhat a mark or scar signifying the connection of the baby to the mother during fetus development. the umbilical cord is the route all the nourishment from the mother take in order to get to the baby and is cut upon birth of the baby. Since kyle was grown in a pod, with the pink fluid Adam invented, which supplied kyle with all the nourishment he needed in order to abolish the need of a surrogate mother, an umbilical cord was no longer needed and, thus, no navel because there was nothing there in the first place.
Who cut sakura's hair?
she cut her hair herself.
What are some tips for installing a skylight to brighten an old house?
In order to install a skylight there are first some basic materials that you will need including: 2x4's for the frame, drywall and finishing supplies for the ceiling, roofing paper, roofing nails, and flashing for the roof. There are 5 basic steps in order to accomplish this task. You will first need to cut and frame the opening in the ceiling. You can then cut back the roofing and attach your beautiful skylight. You then want to slip in the underlayment. You then need to install the bottom and step flashing. You are not ready to install solid flashing.
Can kirlia learn cut?
no, kirlia can't learn the HM CUT.
How can I add more cord to my macrame project?
To add more cord to your macrame project, simply cut a new piece of cord to the desired length and attach it to your existing project using a square knot or another appropriate knot. Continue your macrame pattern with the new cord as needed.
How can I replace a plug on a cord?
To replace a plug on a cord, first cut off the old plug and strip the insulation from the cord wires. Then, attach the wires to the new plug following the manufacturer's instructions. Make sure to secure the wires properly and test the connection before using the cord.
How can you use the word cord in a sentence?
he cut the Cord. The cord strangled around his neck.
Can you cut a kittens umbilical cord with scissors?
You can cut the cord with sterilised scissors, but be careful: first you must tie the cord and then cut it at 1 inch (2.5 cm) from the kittens belly. You can cut the cord with sterilised scissors, but be careful: first you must tie the cord and then cut it at 1 inch (2.5 cm) from the kittens belly.
How do you make an electric cord shorter?
Cut it. Then attach new end (either male or female, as desired) in accordance with manufacturer's instructions. Ensure you use correct size and style replacement end.
How can I replace the end of an extension cord?
To replace the end of an extension cord, you can cut off the damaged end, strip the insulation from the wires, and attach a new plug following the manufacturer's instructions. Make sure to match the wire colors and securely tighten the connections to ensure safety.
How can I change a plug on a cord?
To change a plug on a cord, first cut off the old plug and strip the insulation from the wires. Then, attach the wires to the new plug following the manufacturer's instructions. Make sure to match the correct wire colors to the corresponding terminals on the plug. Finally, secure the wires in place and test the connection before using the cord.
How can I perform a cord end replacement on my electronic device?
To perform a cord end replacement on your electronic device, you will need to carefully cut off the old cord end, strip the wires, and attach them to the new cord end following the manufacturer's instructions. It is important to ensure that the wires are connected securely and that the new cord end is properly insulated to prevent any electrical hazards. If you are unsure or uncomfortable with this process, it is recommended to seek assistance from a professional technician.
What happens to the mothers umbilical cord after its cut?
The umbilical cord comes out of the mother with the placenta.
How long does it take to cut a cord of wood?
The time it takes to cut a cord of wood can vary depending on the size of the wood pieces and the tools used, but on average it can take a few hours to a full day for one person to cut a cord of wood.
How do you put a nes controller in a wii?
unfortunately, your can either "House Hold Hack it" or use a Nintendo gamecube controller instead. if you wanna "House Hold Hack it" you can cut the nes controller's wires in the middle of the wire and re-sotter a usb or wii plugin end thingy to it. *Spelling issues aside, the previous answer neglects to mention that the Wiimote itself can be used as an NES controller when turned sideways, but if you really want it to feel old-school, your best bet is to purchase a classic controller, which is essentially a super Nintendo controller with two analog sticks, and two extra shoulder buttons. It's shape is that of the SNES controller, though.
What is the purpose of the umbilical cord What two things does it attach and how is it beneficial to the baby?
The umbilical cord is the baby's life line. Without the umbilical cord the baby will not grow. Its purpose is to pass food from the mom to the baby that is why at birth the umbilical cord is cut off because theydon't need it anymore because they start feeding on milk (breast milk) or normal formula. It is essential to the baby's growth and development. Without it there's no baby!
