go to start> run> type in (cmd) then click ok, then type (ipconfig/all) you will find it! if you want to know the number code then its> 192.168.1.1
The path of last resort for a router is the default route that is used when the router cannot find a specific route in its routing table for a given destination. It is typically configured to direct packets to a gateway of last resort, often leading to an Internet Service Provider (ISP). This ensures that traffic can still be routed even if no explicit path exists for a particular destination, allowing for basic connectivity in broader networks. In IPv4, the default route is usually represented as 0.0.0.0/0.
There is none. AOSS is a Buffalo Technology product, not Belkin.
There are several types of router speeds. These include 802.11 b, the slowest, and 11 Mbps is the fastest.
The button is on the router and not the PS3
whenever you log into your cisco router....
A router is not part of the PS3 hardware, you must purchase a router if you need one.
It might be a default password which you can find in the manual for the router. If the router is not your you have to ask the router owner.
Go in available networks list, and find your router. It should have some default name which you can find in the router's manual. When you find it, connect to the network. Then open the browser and type in the address field the default ip address (in manual). You will need default password. If you do not have manual. You can find all required information in internet.
All default passwords are available online. Just google your router brand and model + default password. You will find all information you need and more.
default
The name for the router should be on the router itself such as Linksys. If he does not know the username for the wireless router usually the company's set default is admin. I hope this helps a little.
Of course you can. What you need to know is default user name and its password. Also you need to find out its default IP address all that information you can find at http://www.buffalotech.com/support/downloads. Then connect to the router, you can use either a lan cable or wireless interface. Open your browser and punch in the default IP address, after you will be asked to enter default user name and password. If you did everything right you will gain access to the system properties of the router.
ip default gateway
172.16.1.1
what is the default password of Belkin wireless router modem
the router interface closest to the computer
The "default gateway" is your router.