0
If you want to find it on your own, apply an increasing reverse voltage to the diode until a large current flows. If you do this, put some sort of resistor in series to prevent overload. This will ruin the diode.
Or you can check the data sheet. a good search for the particular diode you are using should help, or you can go to the company who sold you the diode and they should have a data sheet readily available. There should be a graph showing reverse current vs. voltage. There should also be a line in the data sheet that says peak reverse voltage which may be easier for you to follow and understand.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What pick inverse voltage?
You mean peak inverse voltage.It is the maximum voltage (peak) the diode can be reversed biased (inverse) by without being destroyed.
If a diode is connected to a battery and a lamp what happens when the diode direction is reversed?
I diode allows current to flow in only one direction. Therefore, if a lamp is "on" in a DC circuit, and the diode in series with the lamp is reversed, the light will be turnned off due to the diode blocking current flow (unless the voltage is above the breakdown voltage of the diode - if this is the case, the diode will fail). If this is an AC circuit, every half cycle the diode will turn on, then the next half cycle it will turn off. To your eye, the bulb will most likely appear slightly dim due to this on then off cycling. If the diode is reversed, there will be no apparent change. The difference is the half cycle the diode would have been off before reversing, it will now be on, etc.
What is the difference between a 1N4007 diode and a 1N4007S diode what does the s do?
The difference in the 1N4007 diode and the 1N4007S diode is the voltage. The 1N4007S has a higher voltage but the meaning of the S is not listed.
Why breakdown occurs in diode?
Normally too higher voltage burns the diode.
What happens when diode is supplied with a voltage higher than RIV in reverse bias?
when diode is supplied with a voltage higher than RIV in reverse bias, the diode will burn out and will have zero resistance.
How is the zener diode connected to protect the load?
A: A zener is a diode that if reversed voltage is applied will conduct at a certain voltage. This diode zener therefore will conduct at a preset voltage limiting the over voltage to the diode conducting voltage and no more so the load can see the voltage up to the zener voltage and no more because the zener will sink the extra current from over voltage situation.
What is the forward voltage of a silicon based zener diode?
It would be 0.7V, the same as any other silicon diode; except for one thing, most zener diodes are manufactured with a reversed diode in series with them. When the zener is operated in its normal zener breakdown mode this reversed diode conducts, letting the zener operate. When the zener is operated in its forward biased mode this reversed diode prevents conduction. Thus most zeners have no forward voltage.
What is forward voltage of a silicon based zener diode?
It would be 0.7V, the same as any other silicon diode; except for one thing, most zener diodes are manufactured with a reversed diode in series with them. When the zener is operated in its normal zener breakdown mode this reversed diode conducts, letting the zener operate. When the zener is operated in its forward biased mode this reversed diode prevents conduction. Thus most zeners have no forward voltage.
What pick inverse voltage?
You mean peak inverse voltage.It is the maximum voltage (peak) the diode can be reversed biased (inverse) by without being destroyed.
What does mean by reverse bias diode?
A A diode has two state either on [forward conduction .7 volts. Or reversed bias meaning the diode voltage polarity are revered or cut off, depends on the diode but it will leak some current , Anyhow that is reversed bias diode conditionForward conduction voltage can vary between about 0.6 volts and about 1.4 volts depending on the diode and the current. Also, some diodes, such as zener diodes, will conduct in the reverse direction. Reverse bias is simply where the anode is more negative than the cathode.
If a diode is connected to a battery and a lamp what happens when the diode direction is reversed?
I diode allows current to flow in only one direction. Therefore, if a lamp is "on" in a DC circuit, and the diode in series with the lamp is reversed, the light will be turnned off due to the diode blocking current flow (unless the voltage is above the breakdown voltage of the diode - if this is the case, the diode will fail). If this is an AC circuit, every half cycle the diode will turn on, then the next half cycle it will turn off. To your eye, the bulb will most likely appear slightly dim due to this on then off cycling. If the diode is reversed, there will be no apparent change. The difference is the half cycle the diode would have been off before reversing, it will now be on, etc.
Is led a voltage controller or current controller?
An LED is a diode that emits light; diodes allow current to flow only one direction. The voltage applied to the diode attempts to force current to flow in a specific direction. If the voltage polarity is reversed, and current was flowing before (so there was a small voltage drop across the diode), current will cease to flow (assuming the voltage is not too high for the diode to handle), and (almost) all the voltage will be dropped across the diode (a small leakage current may flow, which means some of the voltage will not be dropped across the diode, but this is in the milli or micro range). I would never define a diode as a "voltage controller" or "current controller". It could be either or both, from the above description.
Explain how Zener Diode is used as a voltage regulator?
A zener is a diode that has the property when reversed bias to breakdown at a specific voltage this voltage will remain constant as current increase. It is important to be aware that the diode will need to dissipate heat while it is operating. The power is the current flowing through the diode multiplied by the voltage across the diode. For zener diodes with a high reverse breakdown voltage, it can be seen that a lot of power may need to be dissipated for a relatively low current. We can use the constant voltage as a reference voltage. Either a component can be powered directly from the reference voltage created or additional components can be used to increase the available current.
What is dropper diode voltage regulator?
The dropper diode voltage regulator is a type of voltage regulator. It is comprised of a single diode that serves as the voltage regulating device.
What is the effect of diode voltage drop as the output voltage?
The effect of diode voltage drop as the output voltage is that the input voltage will not be totally transferred to the output because power loss in the diode . The output voltage will then be given by: vout=(vin)-(the diode voltage drop).
What is peak inverse voltage with reference to diodes?
The maximum voltage which can apply When diode in reverse bias..if it is exceed that voltage the diode may get damage.
How does the cut in voltage effects the output of a diode clipper?
For answering this question we have to consider the constant voltage drop model of the diode which says that if voltage across diode is less then its cut in voltage than assume diode to be open circuit and if it is greater then assume diode to be short circuit.Till the input voltage is less than the cut in voltage, diode is open circuit(thus no current through the circuit). Thus entire input voltage appears across the diode as output.When input voltage is greater than or equal to cut in voltage, then short circuit the diode. Thus, there will be no voltage drop across the diode as output.Thus cut in voltage decides when to consider the diode open circuit and when short circuit. It decides when the diode will have output when it will not.
