answersLogoWhite

0

Different inputs have different levels, so the first step is to do a 'base' level adjustment on each channel. Put the volume on each channel at 50%, and then adjust the 'trim' (usually one of the very top adjustments) so that each channel has the same level coming out of the mixer. Now, adjust the equalizer controls for each channel. If you are using any inserts or auxilliary paths (echo, etc.) adjust the out & in gains, listening to the mixer output. Once this process is completed, for basic operation you will only need to worry about the bottom gain or volume controls for each channel, and the master output gain. If you Google the make and model of the mixer, you should be able to locate a manual online.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you properly use an ironing board?

To properly use an ironing board, first set it up on a flat surface. Adjust the height if needed. Place the ironing board cover over the board. Plug in the iron and set it to the appropriate temperature for the fabric. Place the garment on the board and iron in smooth, straight motions. Be sure to iron both sides of the garment for best results.


What are the recommended application guidelines for thin set mortar on cement board?

When applying thin-set mortar on cement board, it is recommended to follow these guidelines: Ensure the cement board is clean and free of dust or debris. Use a notched trowel to apply an even layer of thin-set mortar to the cement board. Press the tiles firmly into the mortar, making sure they are properly aligned. Allow the mortar to set and cure according to the manufacturer's instructions before grouting.


How do you properly prepare and install cement board on a floor?

To properly prepare and install cement board on a floor, first ensure the subfloor is clean and level. Cut the cement board to fit the space, leaving a small gap between each piece. Secure the board to the subfloor using cement board screws or nails. Apply thin-set mortar to the seams and corners, then tape and smooth them. Finally, allow the mortar to dry before tiling or finishing the floor.


How do I properly set up an amp for my guitar?

To properly set up an amp for your guitar, first plug in your guitar cable to the input jack of the amp. Adjust the volume and tone controls to your preference. Make sure the amp is turned on and set to the desired channel. Experiment with the settings to find the sound you like. Be mindful of the volume level to avoid damaging your ears or the equipment.


How do you hook up a Technical Pro RX504 integrated amplifier with a DVD player for your songs a computer with your karaoke and a Mackie 16 channel mixing board to sing through?

To hook up the Technical Pro RX504 integrated amplifier, connect the DVD player's audio output (RCA or optical) to one of the RCA inputs on the amplifier. For your computer, use a 3.5mm to RCA cable to connect the computer’s headphone output to another RCA input on the amplifier. To incorporate the Mackie 16-channel mixing board, connect the mixer’s main output (XLR or 1/4" TRS) to the amplifier’s auxiliary input or line input. Ensure all devices are powered on and set the appropriate input source on the amplifier for the desired playback.


Why won't my pecan pie set properly?

Your pecan pie may not be setting properly due to factors such as underbaking, overmixing the filling, using too much liquid, or not allowing the pie to cool completely before slicing. Adjusting the baking time, mixing technique, and ingredients can help ensure your pecan pie sets properly.


Where can I find a nice set of mixing bowls?

One can find a nice set of mixing bowls from retail stores like Target, Super Store, Canadian Tire and many more. One can also find a nice set of mixing bowls on sites like eBay or Amazon as well.


Can you demonstrate how to properly use an ironing board with an iron to achieve wrinkle-free clothes"?

To properly use an ironing board with an iron for wrinkle-free clothes, first set up the ironing board on a flat surface. Plug in the iron and adjust the temperature based on the fabric of the clothing. Place the garment on the ironing board and run the iron over the wrinkles in a smooth, consistent motion. Be sure to iron both sides of the garment for best results.


How did you get the mounting board for the Gatorade Caps Set?

I had the full set of lids, & you had to order the display board from Gatorade.


Did hull US make a set of mixing bowls black on the outside with pink squeggles?

yes. i have two of three set of nestling mixing bowls. mine has hull on th bottom


Which channel is the Nintendo 64set to?

Usually it's set to Channel 3 however sometimes it can be Channel 4 as well.


Where can one buy a mixing bowl set?

You could find a mixing bowl set at your local kitchen and cooking shop. You could find it this in Macy's or cuisinart as well as online retailer such as amazon.