by using capacitor on the line we can reduce spike current or we can use a capacitor bank for the rated line capacity.
When you close an inductive circuit, since an inductor resists a change in current, the initial reaction of the load is to look like a high resistance. As current builds, the resistance falls. With a theoretical source and inductor, current would eventually reach infinity, that is after infinite time, but practical sources and inductors will reach a plateau current. When you open an inductive circuit, again, since an inductor resists a change in current, the inductor attempts to maintain that current, but there is no conductivity for that current so, the inductor presents a high voltage spike in the reverse direction it was initially "charged" with. With a theoretical inductor, and theoretical infinite impedance, the voltage spike would be infinite. Again, practical inductors have a maximum voltage spike, but this spike can still be quite high, even thousands of volts, which can damage the circuit, so it is important to maintain a conduction path for the collapsing field, often a diode, or a resistor/capacitor filter.
Spike ChanneL Is On 25
"Spike" is the bulldog's name from 'Tom and Jerry' .
It stops the flow of the electrical current.
because spike lee is a known pot smoker
A spike is a sudden rise in current that then goes back to normal. Usually caused by a sudden increase in voltage that could be caused by a lightening strike, for example.
A: Any resistance added in series will reduce the current unfortunately will also reduce the voltage
A: Any resistance added in series will reduce the current unfortunately will also reduce the voltage
To effectively reduce electricity consumption and protect your devices using an electricity-saving spike buster, plug your devices into the spike buster and turn it off when not in use. This will help prevent energy wastage and protect your devices from power surges.
A transient, surge, spike, etc.
Spike solutions are created in a project environment to answer tough technical solutions and design problems. Spike solutions reduce the risk of a technical problem or increase the reliability of a User Story estimate (client's requirements). When a technical difficulty threatens to hold up the system's development, then put a pair of programmers on the problem for a week or so and reduce the technical risk.
Reduce current - reduce power.
A resistor.
Reduce the load.
Resistors reduce the flow of current in an electrical circuit, which in turn affects the voltage across the circuit.
If you are asking whether it is still possible for them to have a relationship, the answer is yes. In the current season, (season 9, in comic form), she and Spike are still battling evil together in San Francisco.
A resistor.