That depends on the sand. Choose one of these densities:
Sand, wet - 1920 kg/m³
Sand, wet, packed - 2080 kg/m³
Sand, dry - 1600 kg/m³
Sand, loose - 1440 kg/m³
Sand, rammed - 1680 kg/m³
Sand, water filled - 1920 kg/m³
Now put it into the following formula:
kilograms of sand / density = cubic meters of sand
To calculate the amount of 2 rock needed to fill a space measuring 23' x 24' x 5', first find the volume in cubic feet: 23 x 24 x 5 = 2,760 cubic feet. Since 1 ton of 2 rock typically covers about 0.5 cubic yards, and there are 27 cubic feet in a cubic yard, you would need approximately 2,760 / 27 = 102 cubic yards. Therefore, you would need around 102 tons of 2 rock to fill the space.
A ton isn't a measure of height. It's a measure of weight. 1 ton is equivalent to 2,000 pounds
There is only one so far but I hope there will be a ton more!!
Won Ton Ton.
The population of San Ton Mue is 6,668.
The density of gravel can vary depending on the type and size of the gravel. On average, gravel has a density of about 1.5 tons per cubic meter. Therefore, 1 ton of gravel would be equal to approximately 0.67 cubic meters of gravel. It is important to note that this is an approximate value and may vary based on the specific characteristics of the gravel being used.
Knowing that 1 cubic foot is pretty much equal to 100 pounds or 0.05 ton, 1 ton of gravel is around 20 cubic feet.
Here is only an answer possible, when water is assumed. 1 cubic meter weighs 1 metric ton.
my dog
The weight of 1 cubic meter (m³) of compacted gravel typically ranges from about 1.5 to 1.7 tons, depending on the specific type of gravel and its moisture content. On average, you can estimate approximately 1.6 tons per cubic meter. It's important to consider the specific density of the gravel being used for a more accurate conversion.
There is no such thing as a "cubic ton". There is the ton as a unit of mass (1 ton = 1000 kg), and there is the cubic meter, a unit of volume.
Not necessarily. The weight of a cubic metre of gravel varies, depending on the type of rock and its size. If it is any help, a cubic metre of water is Exactly a tonne. (ie 1000 litres= 1000kgs)
The number of wheelbarrows in a ton of gravel can vary based on the size of the wheelbarrow and the density of the gravel. A standard wheelbarrow typically holds about 6 cubic feet, and a ton of gravel is approximately 20 cubic feet. Therefore, you would need about 3 to 4 wheelbarrows to transport a ton of gravel, depending on how full each wheelbarrow is loaded.
5
About One
how do you determine how many galons are in a cubic meter of water
Type your answer here... 2