Yes, you can in some cases. If your laptop has an HDMI output, a single HDMI lead is all that you will need. Most laptops with an HDMI output also include sound on the connectors but there are some that don't. If your laptop has a DVI connector, a DVI to HDMI lead will work but note that there is never any sound on a DVI connector. If you need to run sound separately, use an analog audio lead. Most televisions have a separate audio input linked to at least one HDMI input that will provide for a separate audio feed.
samsung galaxy note 2
It would be inactive, thus considered a "pure galaxy". This "pure galaxy" is alsoconsidered to be an elliptical galaxy (E7). It would be inactive because no aliengravitational forces have affected the relatively stable system.===============================Note: When you copy a question straight off of your homework assignment anddump it onto a public website hoping that someone else will answer it for you, it'sconsidered poor form to also copy the number of the question along with it.
pp you can use the R motor from a hard drive. note this motors don't work for testing current.
No! The incoming cable needs to go to a modem that converts the incoming DSL Symbols to a digital data stream. This is then passed to the router in the form of some sort of LAN (Local Area Net) format like Ethernet. There may be combined modem/router devices around, but I am not aware of any. Note...I used the term "DSL symbols" because the symbol concept was originally a DSL trick, but it is now used in other non-DSL systems. DSL stands for Digital Subscriber Loop...this gets deeper and deeper as I talk about it.
you will need to plug in the power while play through hdmi. otherwise it won't work.
HDMI cables support both vision and sound signals. Note that a DVI cable carries the same vision data but does not carry sound.
HDMI cables are used as digital video and data links between video sources and televisions. HDMI is compatible with DVI interfaces so if the laptop has a DVI output, a DVI to HDMI cable can be used. If the laptop does not have HDMI or DVI, then there is no way to connect the VGA output to an HDMI input. There are several USB based video displays that can be purchased to connect to the laptop. The display can be used as a copy of the internal screen or it can extend the desktop across both screens. Select a display port that has either DVI or HDMI outputs.
HDMI cable is characterized by its performance rather than the lay up of the individual cables. The choice of a specific wire gauge makes no difference to the effectiveness of the cable. An approved and licensed HDMI cable will work flawlessly if it connected to licensed HDMI outputs and inputs. On the same note, expensive HDMI cables cannot deliver better quality images than cheap ones. The nature of HDMI signals means that the signal is either properly received by a television or not. There is no gradual loss of quality before the signal fails.
Yes, the new ones such as samsung galaxy note or s3 with adapter will work with HD TV and also projectors with hdmi in.
You must hook up the Sony PS3 to a HDTV with either a PS3 component AV cable or a HDMI cable and not the supplied AV cable. Before you purchase the cable examine the back of the HDTV to determine the type cable you need to purchase. HDMI provides for a single plug hook up and is preferred for that and the HDMI sync, however not every HDTV has a HDMI connection. Please note to play certain Blu-ray Discs on the PlayStation 3, you may need to update your PlayStation 3 system software. See Related link
If your cable box has a HDMI cable port, buy an HDMI cable to connect the TV to the cable box. The next best alternative is to use a S-Video cable with a pair of Audio cables. The third best alternative is to use a RF Coaxial cable. The last option is to use a composite Video and L/R Audio cables.You should note that while the TV may be HD capable, the cable box may not support HD so you will have to upgrade your cable box to a HD compatible cable box.
There are Component Video, VGA and HDMI adapters for the dock connector of the iPad. Buy the adapter that will work with your TV. Note that only the HDMI cable will also send audio, so you will need to connect the iPad's headphone jack to external speakers or an audio input if you want better sound.
Many modern televisions have analog inputs as well as the digital HDMI input. It is worth checking the manual to see if the television supports RGB inputs with separate horizontal and vertical sync signals. If the television has an RGBHV input, the VGA signal may well work through it.If the television only has HDMI inputs, the PC will need a DVI display output. This is a digital signal format that is compatible with HDMI. A DVI to HDMI lead should connect the two without problems. Note that HDMI also carries audio on the same cable but DVI does not. To connect the audio, a separate lead will be needed to connect to the analog input that is normally linked with at least one HDMI input. Once again, check the manual to see if one of the inputs has a selectable analog audio input.DVI outputs can be obtained as expansion cards for desktop PCs and as USB devices for use with laptops.Some newer PCs actually have HDMI connectors built in. Laptops sometimes have them fitted to save space on connectors. If this is the case, a single HDMI lead is likely to carry both video and audio signals.
Connect your RPi (assuming model B or the latest model B+) to your router using an ethernet cable (or use the wifi USB doggle). (You may have to connect by ethernet initially so you can set up wifi security.) Plug in a USB keyboard and mouse. Connect to a monitor or TV using an HDMI (High-Definition Multimedia Interface) cable. Plug in the SD card that contains the operating system. Then plug in the power cable to begin. There is no on-off power switch, which is why the power cable is plugged in last, and pulled out to shut down. Note: It is possible to use your RPi without a mouse or keyboard, using SSH and your lan (Local Area Network). You may also need to use an HDMI to DVI adaptor (Digital Visual Interface) depending on the ports available on your monitor or TV.
No!
HDMI is a pure digital signal for video AND audio. It's the best you can get. Component is the next best option for video, but most upscaling DVD players and the like can only send a 1080p signal via HDMI. If you're asking about coaxial as in the coax cable that supplies your cable feed to your tv or cable box then there is no comparison, literally. It's two different things. The cable signal will be decoded in the cable box then sent to the tv via whatever format you're using. If your talking about running the coax straight from the wall to your tv then you will NOT get an HD signal. You will have to have an HD cable box then run HDMI or component out to the tv from there. If you're talking about digital Coaxial cable, that is used for audio only. You have three options here. If you run everything through an HDMI switching receiver then that's all you need. If you're going straight to your tv and using built-in TV speakers then HDMI is all you need. If you're running your video to the TV with HDMI, but audio through a receiver then you can use either digital coax or toslink connections for digital audio. Toslink (fiber optic) is supposed to be the best for audio, but I've used digital coax and don't notice much of a difference. On a side note, if your tv accepts DVI, then you should know that DVI is essentially the same as HDMI except without the audio. DVI is digital video only.