Make goo by add water in a cup and then add food coloring and in another bowl mix corn starch and the colored water. If the goo seems to be runny add corn starch and if to thick and more water.
"Goo" may be a solid or a liquid. To determine whether "Goo" is a solid, it must be put to the "Paint Filter Test". A measured amount of material is placed in a cone shaped container with an open bottom which is lined with a 400 micron filter. After a period of 15 minutes, if any of the material has transferred through the filter, it is classified as a liquid. If not, it is a solid. This test is generally accepted by the DEC and SWANA (Solid Waste Association of North America) as the definitive test to determine if a substance is a solid or a liquid.
both processes are endothermic. melting and boiling occurs at fixed temperatures.
i dont know sorry you should look it up on a different website that doesnt suck
It is actuallty goo.
They all are parts of the states of matter
It is proven to be booth a solid or a liquid. Liquids form into whatever they are put into it. Goo does the same. When you squeeze the goo it feels as if it was a solid but is actualy oozing out of your hands. Also, when you hit the goo with a spoon it will feel as if it is a solid but actually a liquid during that time. Goo has qualityies of botha solid and a liquid. Goo is both a solid and a liquid.
Goo can result from mixing a solid with a liquid when the two substances combine to create a sticky, viscous material. This can happen when a solid material is partially dissolved or dispersed in a liquid, altering its texture and consistency. Depending on the properties of the solid and liquid involved, the resulting goo may have various viscosities and stickiness levels.
Goo freezes when its molecules lose energy and slow down, causing them to form a more rigid and solid structure. This typically happens when the temperature drops below freezing and the goo is exposed to the cold environment.
Goo is typically considered a non-Newtonian fluid, meaning its viscosity can change based on factors like pressure or shear stress. It does not fit strictly into the categories of solid, liquid, or gas, but rather exhibits properties of both liquids and solids.
"Goo" may be a solid or a liquid. To determine whether "Goo" is a solid, it must be put to the "Paint Filter Test". A measured amount of material is placed in a cone shaped container with an open bottom which is lined with a 400 micron filter. After a period of 15 minutes, if any of the material has transferred through the filter, it is classified as a liquid. If not, it is a solid. This test is generally accepted by the DEC and SWANA (Solid Waste Association of North America) as the definitive test to determine if a substance is a solid or a liquid.
Heat will cause a solid to melt into a liquid.
liquid
it depends on the solubility of the solid in that specific liquid. If the solid is highly soluble, then it should dissolve completely forming a solution, possibly coloured. If it is not, then it will just sit in the liquid.
liquid
Heat is added to a solid to make a liquid... this is called melting. some additional liquid (water,ethanol,acid…) also change solid into a liquid.
usually heat the liquid
No