generally speaking, fuel consumption is higher in low gears because the rpm of the engine is higher.
Performance is measured in kilometers/gallon. You have to consider that cars are designed for optimum performance when you drive at around 80 km/hr. For each car there is an optimum ratio distance/fuel consumption.
fast responseElectronic instrument are preferred over conventional instrument because they possess high resolution , and high operating speed , low power consumption and low error on the measurement and also the coast effective means they are economical too.
high
what are the similarities between high and low pressure
No, extremely low or high values are affected by the mean.
The Production Budget for High Heels and Low Lifes was $10,000,000.
Low
Several problems can cause high fuel consumption. An engine that needs a tune up, a slipping transmission or a problem with a sensor giving bad information to the computer can all cause low fuel economy.
The main function of gears is to provide torque. Low gears have fewer teeth than the ring gear. High gears have more teeth, so they are the opposite.
Heat engine utilizes low heat value of oil and also the fuel oil consumption for IC engine usually based on high heat value of oilby Shyam
yes it has reverse and both high and low range gears . i can get it to run in both forward and reverse but only in low range . when i shift IT into high range it is still running in low range .
High gear ratios, 273,373,340 Low ratios, any thing starting with the #4 and up is a low gear ratio. 410 411 456 488 556 and up.
Efficient and low fuel consumption
High fuel consumption, Strong petrol smell in exhaust, low on power, black spark plugs which should be a hazel colour. Any or all of these is a giveaway.
I believe this car has A fuel calculator to tell the opperator the current fuel consumption, If so, The 'low range' light will indicate low fuel.
Resources is directly proportional to Environmental Degradation. When consumption from resources is high Environmental Degradation is high. When Consumption from Resources is low Environmental Degradation is low.
4 gears over 4 gears with a switch to switch between low and high 1234 then 5678
Gear ratios will let the engine run at the speed and load at which it is most efficient, which is good for low fuel consumption and an exhaust that is as clean as possible.