answersLogoWhite

0

What else can I help you with?

Related Questions

Volvo 850 SE remote does not work?

If it is a remote for locking and unlocking doors; with doors all closed, turn ignition switch on and off 5 times within 10 seconds, then press one of the remote buttons within 10 seconds. A small red light will illuminate if remote is working.


Can you reset your central locking?

Yes, you can reset your central locking system, but the method varies depending on the vehicle make and model. Generally, it involves unlocking and locking the doors using the key fob or the physical key, sometimes requiring you to hold down specific buttons. If you're unsure, consult your vehicle's manual or seek assistance from a professional technician.


What unit on a Mercedes s500 controls the door locks?

The door locks on a Mercedes S500 are primarily controlled by the Central Locking System, which is integrated into the car's Body Control Module (BCM). This system manages the locking and unlocking of all doors, including the trunk, using various inputs such as the key fob, interior lock switches, and the ignition system. Additionally, individual door lock actuators are responsible for physically locking and unlocking each door.


How do you disable the auto door locking feature on 2002 Saturn Vues manual says it is user programmable but does not tell how to do?

Not sure if this will help, but in the 2006 VUE manual, page 2-9, it indicates that automatic locking CANNOT be disabled, but the user can disable the automatic unlocking that occurs when the ignition is turned off. To toggle between enabled and disabled automatic UNLOCKing in the 2006 VUE, 1) Insert the key into the ignition and turn it to "RUN". 2) Press and hold the unlock button on the remote key fob for 8 seconds. The horn will chirp once when unlocking is enabled, twice when it is disabled.


How do you reset security system on 2003 Saturn L300?

my locks are locking and unlocking my trunk is unlocking my wipers are going it keeps binging and my keys are in the house


Powerlock affects the passenger pwr window buttons locking unlocking makes them inoperable if they are working or operable if they are not driver door power window buttons always work got a solution?

most likely the drivers master switch is bad but befor you replace it check you power and ground wires that connect the door to the body


Why are automatic locks locking and unlocking while driving?

I had a suburban and just after the doors started locking and unlocking the alternator went out.....beware....there was only about a 30 second warning before it died completely..and that warning was the CD flew out of the CD player.


Where is the PUK code located on your phone?

it is a security setting just like locking and unlocking the mobile


Program keyless entry for 2004 Mazda 6?

Step 1: Open drivers door and leave open. Step 2: Insert key into the ignition. Step 3: Turn key to "ON" position and return to "LOCKED" (i.e. off) position. Do this 3 times within 10 seconds. Leave key in the ignition. Step 4: Open and close the drivers door 3 times. (Door should be left open after this step). Step 5: ECU should respond by locking and unlocking the doors. Step 6: Press "UNLOCK" button on remote #1. ECU responds by locking and unlocking the car doors. Step 7: Press "UNLOCK" button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors. Step 8: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!


Program a keyless entry remote for 2004 Mazda 6?

Step 1: Open drivers door and leave open. Step 2: Insert key into the ignition. Step 3: Turn key to "ON" position and return to "LOCKED" (i.e. off) position. Do this 3 times within 10 seconds. Leave key in the ignition. Step 4: Open and close the drivers door 3 times. (Door should be left open after this step). Step 5: ECU should respond by locking and unlocking the doors. Step 6: Press "UNLOCK" button on remote #1. ECU responds by locking and unlocking the car doors. Step 7: Press "UNLOCK" button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors. Step 8: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!


How do you fix the power locks on your 1990 Cherokee. You hear the clicking but not locking or unlocking?

the locks may be seized or just need to be locked and unlocked until they are freed up. If the jeep has sat for some time just try manually locking and unlocking each door.


What are the M4 carbine cycle of operations?

Firing Unlocking Extracting Ejecting Cocking Feeding Chambering Locking