0
What else can I help you with?
Which scientist invented motion detectors?
After much more research the real answer I believe is here: http://www.patentstorm.us/patents/4703171/fulltext.html I have found that William Kahl invented the infrared motion sensor for burglar alarms first and then he sent in an application for the infrared light switch motion sensor in 1985. There had been other motion sensor light switches but this specific infrared motion sensor (PIR) is the one that is most used today residentially and in companies as well.
What is the vsa switch do on an 05 accurra do?
The Vehicle Stability Assist (VSA) switch on a 2005 Acura is designed to help improve vehicle stability and control during difficult driving conditions. When activated, the VSA system can detect loss of traction and apply brakes to individual wheels or reduce engine power to help prevent skidding or loss of control. The switch allows the driver to turn the system on or off, although it's generally recommended to keep it on for optimal safety.
How do relay switches use electromagnets?
On the outside of the relay switch box there are four connections that are usually numbered on the bottom of the relay box, two of them resemble a negative and a positive connection (usually 12 to 24 volts) that when activated via a push button or a key switch like a car has, it then causes the electric magnet to push or pull an isolated metal lever that closes a gap between the other two connection legs so an isolated positive charge can flow through. The reason that relays are used in conjunction with a key or push button switch is because they are cheaper and easier to replace than a key or push button switch, and if there were no relays involved at all then a key or push button switch would overheat and burn up from carrying to much current. Multiple relays don't require much current to be activated and can individually carry larger amounts of current to the various components in a car or a home stereo and other types of electronics, that is why you hear a click sound when you turn on a monitor or stereo, it is the electric magnet closing the gap!
In drawn to life how does the 3 way switch work?
First you must draw somekind of platform thingy before you can operate the 3 way switch. Then when you are done you see the platforms you drew on some kind of colored lines. There you see a switch. To operate it you must touch it with your stylus and then the circle thing in the center will light up the color which it has operated. If it is the wrong color, tap it again until you get the color you want. (Note: the color that is activated will move depended what color line it is. Ex: If you tapped red the platform on the red line will move. See the scenario?)
When a switch is on is a circuit open or closed?
If the switch is what is keeping the load from turning on, then yes, there is a voltage across the open switch.
How does a sensor light switch work to automatically turn on lights when it detects motion?
A sensor light switch works by using motion sensors to detect movement in its vicinity. When motion is detected, the sensor sends a signal to the switch, which then turns on the lights automatically. This allows the lights to be activated without the need for manual operation, providing convenience and energy efficiency.
How can I activate the manual override feature on my Home Zone LED motion-activated security light?
To activate the manual override feature on your Home Zone LED motion-activated security light, locate the switch on the light and toggle it to the manual override position. This will allow you to control the light manually instead of relying on the motion sensor.
What does a time activated switch use?
A time activated switch could use pneumatics or an resistor capacitor circuit.
How does a motion sensor timer switch work to control the lighting in a room?
A motion sensor timer switch works by detecting movement in a room and automatically turning the lights on or off based on the presence of people. When motion is detected, the switch activates the lights, and after a set period of inactivity, it turns the lights off to save energy.
How does a 3 way motion sensor switch work to control lighting in a room?
A 3-way motion sensor switch uses sensors to detect movement in a room. When motion is detected, the switch sends a signal to the lights to turn on. The switch can be programmed to turn off the lights after a certain period of inactivity. This allows for hands-free control of lighting in a room based on movement.
Where is wiper switch headlights 2000 S80?
that switch does not exist. It simply is activated when you spray your windshield washer fluid onto the windshield. Your headlight switch has to be on. I know your lights are always on, however the wipers for your headlights will only activated if the headlight switch is in the on position.
How can you tell when a fuel shut is activated?
You find the fuel pump inertia switch and if it is tripped and needs resetting then it was activated.
What are the advantages and disadvantages and applications of a sound activated switch?
it can be used to switch on/off any electrical appliances
How can I test a limit switch to ensure it is functioning properly?
To test a limit switch, you can use a multimeter to check for continuity when the switch is activated. Disconnect the switch from the circuit, set the multimeter to the continuity setting, and touch the probes to the switch terminals. When the switch is activated, the multimeter should beep or show continuity. If there is no continuity, the switch may be faulty and needs to be replaced.
How does a light switch occupancy sensor work to automatically control the lighting in a room?
A light switch occupancy sensor uses motion detection technology to sense when someone enters or leaves a room. When motion is detected, the sensor triggers the light switch to turn on the lights. If no motion is detected for a certain period of time, the sensor will automatically turn off the lights to save energy.
How does a 4 way motion sensor switch work to control lighting in a room?
A 4-way motion sensor switch uses sensors to detect movement in a room and automatically turns the lights on or off. When motion is detected, the switch sends a signal to the lights to turn on. If there is no movement for a set period of time, the switch will turn the lights off. This helps save energy and provides convenience by automatically controlling the lighting in the room based on occupancy.
Need setting instructions for Utilitech item 247338 Motion Activated Flood Light?
To reset to automatic mode, turn the wall switch off and then back on within 1 second. The floodlight(s) should turn off right away and stay that way until motion is detected.
