The PS3 does have some 2 player games that are great without requiring online multiplayer, but most games are single player and require an online connection for the multiplayer.
PS3 does not use it you need WiFi or Ethernet and not something plugged into the USB port. The USB port can not be used on the PS3 to provide internet connection
Many different things could be wrong. The cable could be bad even if it is newly purchased. What do you have the other end of the cable plugged into. Can you unplug the PS3 and verify that the connection works by plugging it into a PC or other ethernet capable device. Many people have though that the ethernet input on the computer was an output which would allow them to use the computer to provide internet for the PS3. Both My PS3 and PC ethernet cables are plugged into the back of my wireless router (for wired connection). The router also has an ethernet cable which is plugged into my cable modem. The router was purchased to allow two items to be connected to the cable modem, but the system will also work if you just unplug one device from the modem and plug in the other. Of course the first time you will have to do the set up for the internet connection.
To set up a wired internet connection on your PS3 first make sure that you have an ethernet cable from a router with internet plugged into your PS3. Next go into Settings>Network Settings>Set Up Connection. Follow the instructions on screen making sure you input valid information about your network. Submit and your PS3 should now be connected to the internet using the Ethernet cable!
go through your network settings and to your internet settings. It should ask you if you want a direct line or wirless. choose wireless then you have scan for your router. You are going to need your wpa number as well.
It's simple 1)Turn the PS2 and broadband router off. 2)Connect the first Ethernet cable to an Ethernet port on the broadband router and the Ethernet port on the PS2 Network Adapter. 3)Connect the second Ethernet cable to another Ethernet port on the broadband router and the Ethernet port on your PC's Network Interface Card (NIC). 4)Turn on your router, then your PC. 5)Check your PC can access the Internet - your broadband router may require a specific configuration to do this. Refer to the router's instructions for specific support. 6)Turn on your PS2 and insert the Network Access Disc. 7)Follow the on-screen setup instructions. Refer to the Network Access Disc manual for further support. Good Luck
You should have a modem plugged to the xbox Internet slot. Have all your Ethernet cables and DSL plugged and have the Internet plugged in and switched on
If you don't have a wireless connection, then yes.
Keep the ethernet and the phone line cables plugged into the sockets they are supposed to be in
the ethernet adapter driver is not installed
PS3 does not use it you need WiFi or Ethernet and not something plugged into the USB port. The USB port can not be used on the PS3 to provide internet connection
You need an Internet source, but you can also connect to the PS3 wired with an ethernet cable plugged into the back of the PS3 and into a router or modem.
Once you ave plugged your Ethernet cable to your modem just hook the other end up to your gaming console/computer and that's all you have to do. you should then be connected to the internet! youtube.com/unlimitreflex
No. a Internet card is to slow to run online gaming
Insert the MagicJack Plus device into the USB port on the device's power adapter. Use an ethernet cable (RJ45) to connect the MagicJack Plus to your Internet router. The ethernet cable must be plugged into the port labeled “Internet.” Connect your telephone to the MagicJack Plus using a phone cable (RJ11).
The meaning of the error "Ethernet adapter local area connection 3- media state media disconnected" is that the cable is bad or not plugged in all the way to the media device. It is best to check the cable and make sure that it is plugged in.
no the onlytime that you will ever need your ethernet cable plugged in is if you want to do something using xbox live.
when ethernet cable is plugged in it is detected by ethernet card. if the cable is connected to network it detects that network and dispalys " you are connected to network"