0
What else can I help you with?
How do you set an alarm clock on your zune?
uhm i dont think you can set an alarm clock, but you can have a clock on your zune. go to settings and scroll till you see clock, click 'show clock' to yes and set the time to either 12 or 24 hour setting then set your time
What does the wicked set design represent?
The Time Dragon Clock
How do you set the clock on The Yellow Avenger?
In The Yellow Avenger, a mission says that you need to set the alarm for tomorrow. If you go to SpongeBob's house, and go upstairs and go to his clock, you will see a piece of paper beside the clock after you zoom in automatically. You then set the big hand to the 45 (shown as 9 on an analog clock like SpongeBob has), and the shorter one to move away from the clock and see if it says "mission complete" on the screen. If it doesn't do anything, you need to set the lcok more accurately.
How do you set the clock on your 1994 Ford F150 LXT?
press and hold the clock button then push the seek/scan to change
How do you Set Skyscan 86722?
I have installed new batteries and cannot reset clock. ??
How do you set the clock on a kenwood excelon kdc x592?
To set the clock on a Kenwood Excelon KDC-X592, first press the "Menu" button to enter the settings. Use the control knob to navigate to the "Clock" option and select it. Adjust the hours and minutes using the knob, then press the "Menu" button again to save your settings. Make sure to exit the menu to return to normal operation.
How do you get clock to display all the time kenwood kdc-x397?
To have the clock display all the time on the Kenwood KDC-X397, press the "Menu" button, then navigate to "Display" settings. Look for the "Clock" option and set it to "Always On" or a similar setting. Make sure to save your changes before exiting the menu. If you have trouble, consult the user manual for detailed instructions.
How do I get the time to show after setting the clock on my Kenwood kdc-mp235 stereo?
To display the time on your Kenwood KDC-MP235 stereo after setting the clock, press the "Menu" button, then use the dial to navigate to the "Clock" settings. Ensure the "Clock Display" option is set to "On." If the time still doesn’t show, check the settings to confirm the display mode is not set to a different source like radio or CD. Finally, press the "Menu" button again to exit and save your settings.
How do you set date on kenwood kdc-x993 receiver?
To set the date, the receiver must be in the "Standby" mode. Sources -> Standby Then the date menu item will appear in the setup menu.
How do you Set clock on kenwood kdc-x569?
Press the source button until standby appears then hold the menu button until clck appears. Then press and hold the toggle knob on the right until the clock adjustment appears. Up and down is for hours and left and right is for minutes. Press the source button and your all done
How do you display clock on Kenwood KDC - MP235 stereo?
I've found the manual to be inaccurate as far as setting the clock. To display the clock, hold down the right knob, then choose Freq or Clock. Push again to set. Easy. To set the clock, push the source button until you're in standby mode. Hold the left knob down (volume ctrl) until menu comes up. Either push the left knob OR move the right up or down (can't remember which) until you see Clk Adj. Push the vol ctrl knob (I think). Then, the knob on the right goes left right for minutes/hours, and up/down for the other. I believe you can push the vol knob then once its set.
How to setup the bass and equilizer of Kenwood KDC-BT742U?
To set up the bass and equalizer on the Kenwood KDC-BT742U, first access the audio settings by pressing the "Menu" button, then navigate to "Audio" and select "EQ." Choose your preferred equalizer preset or create a custom setting by adjusting the bass, midrange, and treble levels to your liking. For more bass, increase the low-frequency settings, and fine-tune until you achieve your desired sound. Don’t forget to save your settings before exiting the menu.
How do you set the time on a kenwood mp 235?
These are tricky to figure out if you dont have the book. Hit the source button(SRC) until you go into "STANDBY", then hit the menu button. Toggle through the options until it gives you the option to set clock.
How do you set the clock on a kenwood kdc mp342u?
Press and hold the s button when the demo flashes press and hold both sides of the left and right arrow buttons,the ones you use to change tracks on a cd,hold both the left and right down and it will take you to another menu,got til you see the minute,the hour is after the minute
In Pokémon Emerald, what is the clock set time for?
the clock is set for time
How do you set clock on 2000 mountaineer?
'how do I set the clock on a 2001 mercury mountaineer'
How do you set the clock on a 2001 Aurora?
how do you set the clock on a 2001 oldismobile aurora
