Want this question answered?
Waves travel through water, but they do not carry the water with them.
The P-wave which is a form of body wave known as a compression or longitudinal wave.
Average Current = 0.636 * (Peak Current)so Peak Current = (Average Current)/0.636RMSCurrent = 0.707 * (Peak Current)so Peak Current = (RMS Current)/0.707Because both equations are in terms of Peak Current, we can set them equal to each other.(Average Current)/0.636 = (RMS Current)/0.707(42.5)/0.636 = (RMS Current)/0.707thenRMS Current = (0.707)(42.5)/0.636 = 47.24 ampsAnother AnswerSince the average value of a single sine wave is zero, you cannot calculate its r.m.s. value!
-25 degrees to +25 degrees __ It varies a great deal by area and season. In Southern Ontario for instance, the temperature can plunge to -30 Celsius in January. In the summer months, it is no longer unusual to have +35 Celsius temperatures. Currently, Ontario is in the midst of a heat wave. Today (May 28 2012) the temp reached 33 degrees. Three weeks ago the temp hovered around 10 Celsius. The northern regions see huge swings in temperature as well, depending on season. They can go from -40 to 25. The lowest on record for Whitehorse, Yukon is -62 and highest is +34 Celsius.
Wave length, also known as cycle and period, is the difference in magnitude from one point on a wave to the corresponding point on an adjacent wave as measured along, and defined by, the x-axis of the graphed wave forms. Wave height, also known as magnitude, is the distance above or below the x-axis as measured along, and defined by, the y-axis of the graphed wave forms.
Measures wave heights.
Could you tell me what is the average wave height on Winnipeg lake during the months of September to December. Thank You in Advance
For water waves, the tsunamis reach the greatest heights
yes
Transverse Wave
The water makes a surface wave.
A measure of the strength of a wave is its amplitude which is the vertical distance between the heights of the wave's peaks and the heights of its troughs. An ocean wave might be said to be 20 metres high, for instance, meaning that an observer can see that the bottom of the wave is 20 metres below the top of the wave. The amplitude of that wave would be 20 metres. If you wanted to compare two waves you could use their amplitude ratio, simply the ratio of their two amplitudes.
Wave Blaster
Incoming storms, temperature, and ocean .wave heights
there has to be an ocean. or maybe a lake. :) hope this helps!
12 feet
maybe by wave erosion because all the wavers and rain pile up in 1 spot forming a lake