The symbol for inductive reactance is XL.
yesAnswerNo, but you can counter its effects. For example, if your load is inductive, then you can counter the effects of its inductive reactance by introducing capacitors with equal capacitive reactance.
== == Add a capacitor or a synchronous motor or a phase advancer to the transmission line so that it can nullify the effect of inductive reactance since the above elements gives capacitive reactance. Doing this also improves the power factor.
No. It depends on the inductive and capacitive reactance of the load.
Ohms, resistance in an inductor increases as the frequency of the AC signal increases, this "artificial resistance" is called impedence, and it is measured in ohms
The reactance of an inductor depends only on its inductance and the frequency.The voltage and any series components are irrelevant.Z = j 2 pi f L = j 2 pi (100) (0.5) = 314.16 ohmsreactive
Inductive reactance, as well as capacitive reactance, is measured in ohms.
Inductive reactance is directly proportional to frequency. This means that as the frequency of an AC circuit increases, the inductive reactance also increases. Conversely, as the frequency decreases, the inductive reactance decreases.
Inductive reactance.
The unit of measurement for inductive reactance (XL) is the ohm.
Inductive reactance does NOT have it own sign or symbol. Rather, it uses Ohms as a quantifier. But Capacitive reactance ALSO uses Ohms as a quantifier. Fortunately, 1 Ohm of Inductive reactance is cancelled by 1 Ohm of Capacitive reactance at the same frequency of measurement.
It isn't necessarily so. The capacitive voltage is the product of the current and capacitive reactance, while the inductive voltage is the product of the current and the inductive reactance. So it depends whether the capacitive reactance is greater or smaller than the inductive reactance!
yyiiiiii
ohms
Inductive reactance, as well as capacitive reactance, is measured in ohms.
Yes. Inductive and capacitive reactance is measured in ohms, and it is entirely possible for reactance to be greater than 1,000, or even 1,000,000, ohms. It all depends on frequency.
Susceptance is the reciprocal of reactance, and is expressed in siemens (symbol: S). So, inductive susceptanceis the reciprocal of inductive reactance, and capacitive susceptance is the reciprocal of capacitive reactance.
There is no such term as 'inductance reactance'; the correct term is 'inductive reactance'. This is the opposition to the flow of a.c. current, due to the inductance of the load, and the frequency of the supply, and is measured in ohms.Inductive reactance is directly proportional to both the supply frequency and the load's inductance.