There is a problem with your ABS. Get it seen by a mechanic.
The ABS (Anti-lock Brake System) detects a problem with the system. The ABS light will remain on until the problem is fixed. Once the problem is fixed correctly the ABS light will reset itself.
The ABS (antilock brake system) light is on because there is a problem with the ABS system. Until that problem is fixed, the light will remain on and the ABS system will not be functioning. You will still have regular brakes but without the ABS function. Take it to a qualified mechanic for repair.
The ABS light is on because the ABS module detects something is wrong with the system. It will remain on until it is fixed. As long as the light is on the ABS system will not function if needed. Take it to a trusted garage for diagnoses.
The traction light is on becasue there is no communication between the traction control and the ABS. You will need to check the ABS sensor which is probably damaged or need cleaning. The spanner light normally means go to workshop as there are some problems with the engine electric. The spanner light could be on because the traction light is on. Once the traction issue is sorted, the light should come on automatically. If the spanner light is on on its own or has been on before the traction light then probably the oxygen sensor needs changing.
Have the front wheel bearings checked. There is a similar question on this site with this answer. The symptom was (abs disable on error display and the abs light on. Could be same problem. Slightly different simptom.
why the abs light come on and how rest
My ABS light was coming on too and I found out it was my ABS control module, which isn't cheap. I found out this is a common problem in 1998 Honda passports.
There could be a lot of causes to this light being on.......... Have a technician hook it up to an ABS computer.
Something is wrong with the ABS system.
Honda odessy abs light on when driving
There is a problem with the system. Have this looked at by a professional.
ABS stands for Automatic Braking System. The ABS light in a 1997 Ford Explorer will come on when this braking system is activated.
Bring to a shop that has an ABS scanner to determine the problem
most of the time your pads are about gone
Bring to a shop that has an ABS scanner to determine the problem
There are several causes for ABS light to come on the 99 Sunfire. This may be due to worn or leaking master cylinder, contamination of brake fluid, or leaking brake hose.
Have the ABS repaired by a professional. They will reset the light. Resetting the light without repairing the problem will do no good. The light will just come back on.