answersLogoWhite

0


Best Answer

KA stands for kilo-amps, or thousands of amps. Thus a 2KA breaker means it will trip when the load exceeds 2,000 amps.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is KA in Circuit Breaker?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Movies & Television

Which circuit breaker is preferred for extra high tension application?

bulk oil circuit breaker


What is the definition of a manual reset circuit breaker?

A manual circuit breaker must be reset by hand, as opposed to an automatic circuit breaker, that may be able to reset itself once it cools down.


What is the circuit breaker in a York Fitness T101 treadmill?

What is a fitness circuit? a fitness circuit is were it makes u fit and healthy. Is a circuit breaker a circuit? No, it is an inherent part of the circuit. In simple terms and condtion


What safety device is fitted to ensure a circuit breaker can not be racked out when closed?

A remote racking device is the name of a safety device that is fitted to ensure a circuit breaker cannot be racked out when closed.


What causes circuit breaker to trip even when it's properly rated?

A circuit breaker is dual function. The only time it will trip is if it senses a fault current that is rated higher than the breaker rating (short circuit). The other trip condition is if the circuit is overloaded and is drawing a current higher than the breaker rating. On breakers that protect motor feeders the breaker has to be rated 250% higher than the motors full load amperage. If the breaker has lots of use and is used for a switch being manually turned off and on will weaken the trip value of the breaker. If you have access to, or know an electrician, a clamp on amp meter on the conductor that the breaker feeds will tell you what is happening. Clamp the line and turn on the load to see exactly what the current is. If, like you say, the breaker is properly rated and the current is within the breaker limits then change out the breaker for a new one.

Related questions

What is a Circuit breaker and explain type circuit breakers?

A circuit breaker is a switching device which can make,brake and carrying (or trip the circuit) that specified over currents for a small interval of time . There is a different types of Circuit Breaker's are there 1.According to their arc quenching media these are divided into 4 types a) Oil circuit breaker b) Air blast circuit breaker c) SF6 circuit breaker d) vacuum circuit breaker 2. According to their services the circuit breaker can be divided as a) Outdoor Circuit Breaker b) Indoor Breaker 3. According to the operating mechanism of circuit breaker they can be divided as a) Spring operated Circuit Breaker b) Pneumatic Circuit Breaker c) Hydrolic Circuit Breaker 4. According to the voltage level of installation these are divided into 3 types a) High Voltage Circuit Breaker b) Medium Voltage Circuit Breaker c) Low Voltage Circuit Breaker.


Is the circuit where is the is the circuit where is the circuit breaker for the?

The circuit breaker for the headlights is intergrated with the headlight switch.


What is ics icu icw of load breaker?

Ics: Service breaking capacity for a short circuit (in kA)Icu: Ultimate breaking capacity (in kA)Icw: Withstand capacity (usually in kA for 1 sec)


What is circuit breaker handling trolley?

handling the circuit breaker


Is there an error if the upstream circuit breaker is 16A TP and the downstream circuit breaker is 16A TPN?

is there an error if the upstream circuit breaker is 16A TP and the downstream circuit breaker is 16A TPN?


What is a switch that opens a cuircut when too much current is flowing?

Where I'm from, it's called a "circuit breaker".A circuit breaker.


Is a circuit breaker a resistor?

No, a circuit breaker is a safety device that is used in a circuit to limit the amount of current in an overload or short circuit condition. The number on a breaker is the top end current that the breaker will handle before opening the circuit.


What is a non auto circuit breaker?

A non-auto circuit breaker is a circuit breaker with the trip element removed. Basically, it is a modified circuit breaker that is now a disconnect switch (glorified disconnect switch).


Were is the platinum in a circuit breaker?

There isn't, the contacts in a circuit breaker are plated with silver.


How do you change wire fuse for circuit breaker?

A circuit breaker does not have a wire fuse in it.


Is both circuit breaker and circuit gear have same functions?

circuit breaker is break the electrical circuit .circuit gear is generator analyzer


What must you know before you change a circuit breaker?

Before you change a circuit breaker it has to be established that the breaker is at fault and not some other part of the circuit.