0
If you are referring to an optometrist Opto Map....then it is a machine that takes a picture of your retina so the doctor can look at 200 degrees of the inside of your eye
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is an opto-electronic device?
Opto-electronic is an abbreviation of "optical-electronic". It refers to a class of electronic devices that incorporate light emitters and/or detectors. Opto-electronic devices include emitters like LEDs and solid-state lasers and detectors like photodiodes.Products incorporating opto-electronic devices include:Remote controls.Digital cameras.Solar cells.Barcode scanners.
What is MCT2E optocoupler?
The MCT2E opto coupler is basically a communication protection scheme. The opto coupler provides the galvanic isolation between the sending and the receiving side.
What is Opto-Coupler IC'S?
to prevent the high voltages The main purpose of an opto-isolator is "to prevent high voltages or rapidly changing voltages on one side of the circuit from damaging components or distorting transmissions on the other side."[2] Commercially available opto-isolators withstand input-to-output voltages up to 10 kV[3] and voltage transients with speeds up to 10 kV/μs.[4]
What is an instrument for simulating the apparent motions of the sun moon and other celestial bodies against a background of stars?
Solar System models, especially mechanical models are called orreries.
How does a solid state relay work?
A solid state relay (SSR) is an electronic device to switch the electrical current, rather than an electromechanical device. An electromechanical relay uses a magnetic coil and mechanical contacts. When current flows through the coil, it pulls down a piece of iron called an armature, causing the mechanical contacts to touch and thus close an electrical circuit. A solid state relay (SSR) has no mechanical moving parts, but instead uses a three terminal device such as a triac (triode AC), SCRs (back-to-back thyristors), or FET (field effect transistor) to conduct the electrical current. When the third terminal (gate) is energized by the control input, the device conducts. Essentially the solid state relay controls a larger electrical current by accepting a small control signal. There are no moving parts. Advantages of solid state relays are: they have no internal arcing or contacts to wear out, can last virtually forever, can have extremely low control input requirements, and are immune to vibration or G-force chatter. There are 3 installation parameters that must be planned for. Avoid over-amperage (inrush > than SSR rating), over-voltage (voltage surges) and over temperature. Solid state relay has also opto isolation feature. control signal & power line is completely isolated by an internal LED. It is just like a big version of Opto Coupler.
What is a electro-opto-mechanical engineer?
That is a very accomplished engineer because he is trained in electronics, optics, and mechanical engineering. That covers a lot of ground and is very specialized.
Which of the following lapton or notebook pointing devices looks like an opto-mechanical mouse turned upside down?
Trackball
When was Edison-Opto created?
Edison-Opto was created in 2001.
What instrument do you use to measure the electrical and mechanical vibrations?
What instrument do we use to measure the electrical and mechanical vibrations
What is the Samoan translation for instrument?
Mechanical instrument - meafaigaluega; musical instrument - meafaifaili or meafaili.
What is the electrical circuit arrangement fort he reflective opto transducer?
what is the electrical circuit arrangement for the reflective opto transducer
What has the author Jaume Esteve written?
Jaume Esteve has written: 'Nano-opto-mechanical systems (NOMS)' -- subject(s): Nanostructured materials, Nanotechnology, Congresses, Optical properties, Polymers
What is the difference between electrical and mechanical instrument?
mechanical moves it self electrical bad noise
What is an opto-electronic device?
Opto-electronic is an abbreviation of "optical-electronic". It refers to a class of electronic devices that incorporate light emitters and/or detectors. Opto-electronic devices include emitters like LEDs and solid-state lasers and detectors like photodiodes.Products incorporating opto-electronic devices include:Remote controls.Digital cameras.Solar cells.Barcode scanners.
What does opto mean in Greek?
In Greek, "opto" means "I see" or "I perceive." This root is commonly used in words related to sight, vision, and perception.
What type of instrument is a Clavenet?
The Clavenet is a keyboard instrument which is an electro mechanical instrument. This means that it requires amplification to produce sound at an acceptable level.
Instrument which converts mechanical energy in electrical energy?
Its Dynamo....
