It is called "frequency modulation"
in frequency modulation, frequency of carrier signal changes. so frequency variations of carrier convey all the information in frequency modulation.
angle modulation is called non linear modulation because the information is stored in phase of the carrier signal
Single Side Band Suppressed Carrier. This is a modification of AM (Amplitude Modulation) that both reduces required transmitter power and signal bandwidth. The carrier is first modulated by the signal the same as in ordinary AM, then is sent through a bandpass filter to remove one sideband and the carrier. To demodulate it and recover the original signal the receiver must reinsert the carrier using a BFO (Beat Frequency Oscillator) and Mixer.
for colour sub carrier frequency
AM means Amplitude(=height) modulation, so the frequency stays the same and the message is coded into variations of the strength of the signal. FM stands for Frequency modulation. Here the strength of the signal stays the same and the message is coded into changes in frequency instead.
amplifiers
more or less, yes
carrier signal- use for the purpose of conveying information. modulating signal- causes variations in some characteristics of carrier signal. modulated signal - carrier signal after altration in its characteristics is called modulated signal. example- if you want to see an object (suppose it is an modulating signal),you need light(light is carrier signal) and when light will reflect on object you will be able to see if (that is modulated signal)
Amplitude of the (high frequency) Carrier signal is varied with respect to low frequency of message signal is called amplitude modulation. Frequency of the carrier signal is varied with respect to low frequency of message signal is called frequency modulation.
modulating signal is the message to be carried by the carrier signal.
The carrier signal occurs at the beginning to transmit information.
in frequency modulation, frequency of carrier signal changes. so frequency variations of carrier convey all the information in frequency modulation.
It isn't always. Baseband analog signals have no carrier.
Carrier signal is of high frequencies, it gives strength to the original signal because original signal cannot travel long distances so it needs to be strengthen a bit for transmitting. The carrier signal is a high frequency signal, called an RF. Radio Frequency signal, it is to high for the human or animal ear to detect it, so its outside the audible spectrum and can easily be transmitted over the air to receivers that is tuned to receive that frequency and detect any modulation on that signal.
No, the carrier signal is not present at the output of double side band suppressed carrier. That is what suppressed carrier means. However, the receiver has enough information to regenerate the carrier if need be. The advantage of suppressed carrier mode is that more power can be deployed to the signal-carrying portion of the modulated carrier.
FM stands for frequency modulation. The definition is: when the frequency of the carrier wave is changed in accordance with the intensity of the signal, it is called frequency modulation. In frequency modulation, only the frequency of the carrier wave is changed in accordance with the signal. However, the amplitude of the carrier wave remains unchanged.
Transmit another signal using the same carrier frequency to interfere with the original signal...also known as "jamming". If you have two signals using the same carrier frequency, and you add a second signal source with the same carrier frequency, and an a stronger amplitude (intensity), but different signal data, then it mixes with the original signal at the receiving end, and the original signal cannot be clearly decoded.