Gate diffusion input is defined as the new technique of low power digital combination of circuit design. This allows reduced power consumption and delayed propagation.
The output of the AND gate is high when both inputs are high because that is the definition of an AND gate. (Ouput is true ONLY WHEN Input A AND Input B are true.)
The NOT gate is also called an "inverter", as its output is always the complement of the input. That is, if the input is TRUE then the output is FALSE else the output is TRUE end if). Its implementation electronically is not much different than that of an analog inverting amplifier, except that the gate is deliberately designed to operate nonlinear and change rapidly from one state to another.
Three 2-input XOR gates and one 3-input NOR gate will do the work. Connect each output of each XOR gate to one input of the 3-input NOR gate and apply the two 3-bit words to the inputs of the XOR gates. If X (X2X1X0) and Y(Y2Y1Y0) are two 3-bit words, X2 and Y2 will connect to one XOR gate, X1 and Y1 to the next XOR gate and X0 and Y0 to the last XOR gate. You could see the result of the operation on a LED connected to the output of the NOR gate. Other implementations are also possible of course. The solution above is absolutely correct, but includes a 3 input gate. If the task is to use only two input gates, then a small change will be needed. Take the outputs from any two XOR gates into a 2 input OR gate. Then take the output of the OR gate and the output of the third XOR gate into a 2 input NOR gate. The operation remains identical to the first solution but adheres to the brief of using gates with 2 inputs. In the real world, there is probably no reason to impose such a limitation on a design so the first solution would normally be the preferred route to take.
Out= A'B'C+AB'C'+AC'A'+ABC
This is made by joining the inputs of a NOR gate. As a NOR gate is equivalent to an OR gate leading to NOT gate, this automatically sees to the "OR" part of the NOR gate, eliminating it from consideration and leaving only the NOT part. Truth Table Input A Output Q 0 1 1 0
Gate diffusion input is defined as the new technique of low power digital combination of circuit design. This allows reduced power consumption and delayed propagation.
To produce a 3-input OR gate when only 2-input OR gates are available: Use 3 OR gates Inputs to Gate A are input 1 and input 2 Input to Gate B is input 3 (if 2 inputs are necessary, include input...
For two input AND gate it is 7408for three input AND gate it is 7411
You would connect the output of the first AND gate to one input of the second AND gate. You are left with 2 inputs on the first AND gate and 1 input on the second AND gate. The final output is from the second AND gate.
this shows you everything you need about them Pin Number Description 1 A Input Gate 1 2 B Input Gate 1 3 Y Output Gate 1 4 A Input Gate 2 5 B Input Gate 2 6 Y Output Gate 2 7 Ground 8 Y Output Gate 3 9 B Input Gate 3 10 A Input Gate 3 11 Y Output Gate 4 12 B Input Gate 4 13 A Input Gate 4 14 Positive Supply
output is feedback in input
A not gate is a logical gate which inverts a digital signal. If the input to a not gate is 1, then the output will be 0. If the input is 0, then the output will be 1.
NOT Gate
A four input and gate is a logic gate with four inputs. The output is true only when all four inputs are true.
INVERTER gate
"not" gate
inverter gate