It is where you insert the HDMI cable for high quality...
either check the hdmi cable or unplug and replug. You have to use the correct input format on your tv. Ex: input one is av cables (yellow,red,white) while input 2 is coaxial. Input 3 should be hdmi. unless you have more than one hdmi input they should be names hdmi 1,2,3 etc. You must select it from your TV remote.
I plugged the HDMI cable into the HDTV and into the PS3. Then I went to the settings for both the HDTV and the PS3 slim and set them for HDMI and sync. When it works right putting a disc into the PS3 will turn on the HDTV and also switch the HDTV over to that HDMI input rather than a cable box or similar item even if it was on the cable box when you last used the HDTV.
HDMI gives a potentially higher signal quality than component video - but whether you will get higher picture quality depends on the quality of your input signal. Blu ray needs HDMI, but anything at 720i or lower will get by on component.
Yes, you can in some cases. If your laptop has an HDMI output, a single HDMI lead is all that you will need. Most laptops with an HDMI output also include sound on the connectors but there are some that don't. If your laptop has a DVI connector, a DVI to HDMI lead will work but note that there is never any sound on a DVI connector. If you need to run sound separately, use an analog audio lead. Most televisions have a separate audio input linked to at least one HDMI input that will provide for a separate audio feed.
This model has an HDMI input. If you can't see a picture when you connect your playback device to the TV with an HDMI cable, you might be on the wrong input on the TV (press the TV/Video button or Source button) or you may have a HDCP issue with the playback device. If you are using a surround receiver or switch for the HDMI inputs, try going directly to the TV. Some receivers can block or corrupt the High Definition Content Protection signal, causing no picture to be output.
The Alienware M17x r3 comes with an HDMI input.
The coaxial RF input on a HDTV will process a HD signal but it is not an HDMI input.
Your home theatre system will need both an HDMI input and output. Most all-in-one systems have no HDMI input. Connect the output of the laptop to HDMI input of the receiver. Connect the HDMI monitor output on the receiver to the TV.
You need a HDMI Input.
Use the component input.
either check the hdmi cable or unplug and replug. You have to use the correct input format on your tv. Ex: input one is av cables (yellow,red,white) while input 2 is coaxial. Input 3 should be hdmi. unless you have more than one hdmi input they should be names hdmi 1,2,3 etc. You must select it from your TV remote.
You need a television that has an HDMI input.
No. HDMI cables will need an HDMI input and only HD capable TVs will have them.
Look on the back of the TV for a HDMI input connection. If it is there, your TV is capable of receiving a HDMI signal.
If it is a playstation 3 and the TV has HDMI input and you have a HDMI calbe then it will work.
It does not have an HDMI input and only component cable inputs on the Vbox2 advanced
The Elite is black, has a HDMI input and a 120GB hard drive. The Pro is white, does not have HDMI input and has a 60GB hard drive.