Cut-in voltage is the value of voltage at which appreciable current begins to flow when a pn junction is forward biased.
cut in voltage *** for silicon is 0.7volts and that for germanium is 0.3volts.According to Millman and Taub, "Pulse, Digital and Switching Waveforms", McGraw-Hill 1965, the cutin (or offset, break-point or threshold) voltage for a silicon diode is 0.6, and 0.2 for germanium.Breakdown voltage is another thing entirely. It is the reverse voltage at which the junction will break down.
In battery technology, Float voltage is the constant voltage that is applied continuously to a voltaic cell under float operation. The voltage could be held constant for the entire duration of the cell's operation (such as in the SLI battery) or could be held for a particular phase of charging by the charger.
A transistor can be in three conditions or states. It can be active (at a voltage higher than the emitter), in saturation or cut off (no current).
the difference between a voltage converter to a voltage regulator,is that a voltage converter,converts or changing the desired voltage to be used while the voltage regulator,regulates the input of the voltage amount not to excess to its inputs.
It prevents the voltage spike that occurs when the magnetic lines of force cut across the solenoid windings when someone shuts the power off the solenoid. It is called inverse voltage and on a 12 volt coil, when you turn it off, the collapsing magnetic field can generate an inverse voltage of 200 volts or more for a split second. This is why sometimes you can get a "poke" out of a 12 volt system. It is the inverse voltage spike that causes a momentary shock to your fingers or body. (this momentary voltage is not harmful to a human). when a coil has a charge cause by applying DC and suddenly disconnected this charge will manifest as a voltage of opposite polarity across the coil the diode will clamp this charge to .6-.7 v removing reverse breakdown voltage present
Cut in voltage (Knee voltage): The forward voltage at which the current through the P-N Junction starts increasing rapidly is called as Cut in voltage or knee voltage.
Cutoff voltage is the point at which the battery is fully discharged. This is usually the point at which the device will shut itself off.
The forward voltage at which the current through the junction starts increasing rapidly, is called the knee voltage or cut-in voltage.
zener cut in voltage
no
fet is a voltage controlled device...cut off voltage in fet refers to that voltage of the gate - source junction at which the current flow through channel is zero
fet is a voltage controlled device...cut off voltage in fet refers to that voltage of the gate - source junction at which the current flow through channel is zero
Knee voltage (cut in voltage) :-The forward voltage at which the current through the P-N Junction starts increasing rapidly is called as Cut in voltage or knee voltage Breakdown voltage :-It is the minimum reverse voltage at which the P-N Junction can conduct without damage to the current
what is the difference between cut- in and cut -out
5v
poles are partially magnetized this causes some voltage called residual voltage
the valence band energy is different in the two substances,so the cut in voltage is different.