answersLogoWhite

0

R-704, also known as refrigerant R-704A, is a type of refrigerant used primarily in refrigeration and air conditioning systems. It is a blend of hydrofluorocarbon (HFC) compounds designed to have low global warming potential. In terms of temperature, R-704 operates efficiently across a range of temperatures, making it suitable for various cooling applications. Its thermodynamic properties allow it to maintain effective cooling performance while being more environmentally friendly compared to older refrigerants.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Continue Learning about Movies & Television

How do you convert output voltage of thermocouple into temperature?

You need to know the temperature of the reference junction and the voltage difference between the reference and sensing junctions. First, you convert the reference temperature to a voltage using the reverse equation or table for your thermocouple type. Then you sum that voltage with the measured voltage. Finally, you convert the summed voltage back to a temperature using the equation or table for the thermocouple type you are using. If the reference junction is at zero degrees C, you can skip the reference summing part. Before computer processing was easy and cheap, the reference junction was often kept in an ice water bath for that reason.


Can copper wire be used for thermocouple extention?

No. A thermocouple is made from two dissimilar wires. At the junction of these two wires, an electrical signal is generated that is measured in millivolts. If you insert another type of wire, such as copper, then you have introduced another electrical junction. Your signal will be (millivolt from junction 1 + millivolt from junction 2). <><><> Maybe. A thermocouple measures the temperature difference between the sensing junction (where the two different metal wires meet) and the other end of the wire, the reference junction. If you extend a thermocouple with copper wire, you will measure the temperature difference between the junction and the location where the copper extension is spliced on. If the copper splice is the same temperature as the reference junction, or if you can measure the temperature at the splice, then it will be fine. In general, it is better to run the thermocouple wire to the reference junction.


List two similarities between a criterion reference test and norm referenced test?

Norma Reference Measurement and Reference Measurement Criteria generally is the most useful frame of reference to describe the level of knowledge and performance of students.


What is the map grid reference for Paris?

Grid reference letter A with an arrow above. Second part of grid reference is an arrow pointing to the right of line the left of it.


Can a private school give a bad reference about a student to prevent them from transferring to another school?

As long as the reference is correct and truthful, there is nothing to prevent them from giving a reference, good or bad.

Related Questions

What is the average Salary of a surgeon in South Africa?

R704 686 :-)


Define a zeotropic refrigerant blend and give an example?

In a zeotropic blend, the blends boil out at different temperature but at the same pressure. typical example is R704


What role does the reference junction play in thermocouple readings?

The reference junction, also known as the cold junction, serves as the point where the thermocouple temperature is compared to the known temperature of the reference junction. This comparison helps to accurately determine the temperature at the measurement point. The reference junction compensation is required because the output voltage of the thermocouple is dependent on the temperature difference between the measurement point and the reference junction.


The reference point for the lowest temperature on the scale for the SI unit of temperature is?

absolute zero


What does the absolute temperature scale use as its reference temperature?

-459.67 F Which is absolute zero and that is the temperature at which all molecular activity stops.


Why is a reference temperature necessary when using thermocouples?

"Since the EMF generated by thermocouple circuits is a function of the difference in temperatures between the measuring junction and the reference junction, it is important that the reference junction be maintained at a constant, known temperature. This can be accomplished by (1) a temperature controlled oven, (2) an ice bath, or (3) an electrical means of simulating a known temperature."Reference Quote from National Plastic Heater (http://www.nphheaters.com/technical/thermo_letter.htm)


Can the temperature sensor be accurately calibrated without using a reference thermometer?

Put it into a temperature controlled enviroment


How do you convert output voltage of thermocouple into temperature?

You need to know the temperature of the reference junction and the voltage difference between the reference and sensing junctions. First, you convert the reference temperature to a voltage using the reverse equation or table for your thermocouple type. Then you sum that voltage with the measured voltage. Finally, you convert the summed voltage back to a temperature using the equation or table for the thermocouple type you are using. If the reference junction is at zero degrees C, you can skip the reference summing part. Before computer processing was easy and cheap, the reference junction was often kept in an ice water bath for that reason.


Is celsius in reference to heat?

Celsius is a unit of temperature measurement based on the Celsius scale, which is commonly used in many countries around the world. It is not specific to heat alone but can be used to measure the temperature of any substance or environment.


How do you calculate specific gravity of sodium silicate at different temperature?

To calculate the specific gravity of sodium silicate at different temperatures, you can refer to a specific gravity-temperature chart for sodium silicate or use the formula: specific gravity = (specific gravity at reference temperature) / (1 + thermal expansion coefficient * (T - reference temperature)), where T is the temperature at which you want to calculate the specific gravity. Ensure that the reference temperature and thermal expansion coefficient values are accurate for sodium silicate.


Without a reference point it would be difficult to define temperature Why?

The BIPM could not vote on an SI unit without reference points. novelstar:)


What are 2 SI units for temperature?

* kelvin * Celsius both temperature scale have the same gradations but differ in end-point of reference.