answersLogoWhite

0

According to Wikipedia:

"Soldering is a process in which two or more metal items are joined together by melting and flowing a filler metal (solder) into the joint, the filler metal having a lower melting point than the workpiece. Soldering differs from welding in that soldering does not involve melting the work pieces. In brazing, the filler metal melts at a higher temperature, but the workpiece metal does not melt. Formerly nearly all solders contained lead, but environmental concerns have increasingly dictated use of lead-free alloys for electronics and Plumbing purposes."
Soldering is a process whereby two or more metal parts (wires, component leads, pipes, etc.) are joined by the melting of a metal between them. The melting metal is known as solder. Traditionally, it was usually composed of an alloy of primarily tin and lead, but due to current environmental regulations, the use of lead in solder is becoming rare. In common useage, the phrases "solder joint" and "solder connection" mean the same thing (see below), and are used interchangeably. The word "connection" by itself can refer to either a "solder connection" or to the metal parts before they have been soldered. Confused? It's gets easier when you look at how the word or phrase is used in a sentence... as follows. The soldering process requires the heating of the parts of the connection to "wetting" temperature, the temperature at which the solder will chemicaly alloy with the metal parts being soldered. This temperature is dependant upon the alloy of solder that is being used; with " traditional" alloys, it is approximately 500 degrees F. Current no-lead solders require considerably higher wetting temperatures. In either case, if "wetting" temperature is not reached, when the solder is applied to the connection, it will melt and flow onto the metal parts, but will not alloy with them, thereby causing a "cold solder joint". By the way, cold solder joints are NOT usually dull and grainey. Dull and grainey solder joints are overheated. Cold solder joints appear uneven and lumpy, and lay on the surface of the connection like water on a waxed car hood - the solder does not flow out smoothly. Depending on the application, the heat required to make the solder connection can be provided by a soldering iron, a solder gun, a torch, or a hot-air gun. Other methods exist, but are usually used only in automated processes. When a solder connection has been made properly, the connection is solid metal; there is no barrier or space between the parts of the connection. Essentially, the solder has blended with the parts of the connection, forming what is called an "interrmetallic alloy". The intermetallic alloy forms where the space between the parts was before the soldering was perforrmed. Without the formation of the intermetalic alloy, a true solder connection has not been created; what would exist would be "encapsulation" or simple "adhesion", but not a solder connection. This type of metal-to-metal connection is mechanically weak when comaperd to a solder joint, and will not provide the long term reliability and low electrical resistance that a true solder joint will provide.
Soldering is a process whereby two or more metal parts (wires, component leads, pipes, etc.) are joined by the melting of a metal between them. The melting metal is known as solder. Traditionally, it was usually composed of an alloy of primarily tin and lead, but due to current environmental regulations, the use of lead in solder is becoming rare. In common useage, the phrases "solder joint" and "solder connection" mean the same thing (see below), and are used interchangeably. The word "connection" by itself can refer to either a "solder connection" or to the metal parts before they have been soldered. Confused? It's gets easier when you look at how the word or phrase is used in a sentence... as follows. The soldering process requires the heating of the parts of the connection to "wetting" temperature, the temperature at which the solder will chemicaly alloy with the metal parts being soldered. This temperature is dependant upon the alloy of solder that is being used; with " traditional" alloys, it is approximately 500 degrees F. Current no-lead solders require considerably higher wetting temperatures. In either case, if "wetting" temperature is not reached, when the solder is applied to the connection, it will melt and flow onto the metal parts, but will not alloy with them, thereby causing a "cold solder joint". By the way, cold solder joints are NOT usually dull and grainey. Dull and grainey solder joints are overheated. Cold solder joints appear uneven and lumpy, and lay on the surface of the connection like water on a waxed car hood - the solder does not flow out smoothly. Depending on the application, the heat required to make the solder connection can be provided by a soldering iron, a solder gun, a torch, or a hot-air gun. Other methods exist, but are usually used only in automated processes. When a solder connection has been made properly, the connection is solid metal; there is no barrier or space between the parts of the connection. Essentially, the solder has blended with the parts of the connection, forming what is called an "interrmetallic alloy". The intermetallic alloy forms where the space between the parts was before the soldering was perforrmed. Without the formation of the intermetalic alloy, a true solder connection has not been created; what would exist would be "encapsulation" or simple "adhesion", but not a solder connection. This type of metal-to-metal connection is mechanically weak when comaperd to a solder joint, and will not provide the long term reliability and low electrical resistance that a true solder joint will provide.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Movies & Television

What is the purpose of electronics in a soldering exercises?

It's the other way round, soldering is used in electronics.


What equipments are there in soldering?

There is a lot of equipment in Soldering and I am telling you about which I know. Soldering Iron You can’t do soldering without a soldering iron/gun. But you don’t have to buy an expensive soldering iron/gun. You can find soldering irons in less than $10 that would work for most beginners’ needs. Wire Cutter The wire cutter is a very handy little soldering tool. We mostly use it to cut long component legs, or to strip the end of a wire. Wire Cutters is also known as flush-cutters, diagonal cutters, electronic snippers, clippers, etc. Wet Sponge A wet sponge is very useful for cleaning the tip of the soldering iron. The tip is hot which means it will oxidize very fast and get dirty. A clean tip transfers heat faster and makes your soldering easier. A sponge is so cheap anyway, so you should always keep one together with your other soldering tools. Soldering Stand A soldering iron gets hot after performing soldering, so it’s important to place it in a safe way in between soldering. A soldering iron stand is very useful for this. Since it takes up a lot of space, I don’t bring mine when travelling, but I always have one at my desk in Illinois. Safety Glasses A pair of safety glasses is something I really recommend when you do soldering. The consequences of getting hot soldering splashed into your eye can be terrible. So, please use them. Tweezers Tweezers are great. You can use them to keep components in their place and to avoid burning your fingers when you do soldering. If you ever solder surface mount components, these are very useful for placing small components. Solder wick The solder wick is another tool for removing solder. It’s made up of copper threads that will absorb the solder from the solder joint. For example to remove “solder bridges” between pins on a chip or if there’s a bit of solder left on a bigger solder joint.


What are the similarities between soldering and welding?

In soldering and welding, 2 or more pieces of metal are joined by melting metal at the interface between them. When the molten metal cools and hardens, it physically bonds the pieces together.


How can a technician prevent burning the surroundings while soldering in a tight area?

prevent burning the surroundings while soldering in a tight area


What are the parts of the soldering iron?

Electrical Line, Tip, Metal Rod, Handle, Safety Grip.

Related Questions

Why do you think it best for soldering iron to have its soldering stand?

why do you think its best for soldering iron to have soldering stand


What is the best soldering iron and tip to use on circuit boards?

Soldering irons come in a variety of sizes and shapes. There is a wide selection of soldering irons, soldering pencils, soldering stations and soldering guns available on market in the USA.Which soldering iron is the best soldering iron for you depends on the soldering work you are planning to do and how often you are planning on using your soldering iron. The following four factors should be taken into consideration when picking a soldering iron that will be used for soldering projects on circuit boards:1) ) type of the soldering tools2 wattage of the soldering iron3)temperature control4) tip size and shapeTypes of soldering toolsAll soldering tools can be divided in four different groups-Soldering pencils-Soldering station-Soldering rework /repair stations systems-Soldering gunsSoldering pencilsSoldering pencils are the simplest (and the cheapest) soldering tool. Soldering pencils are good only for simple do-it-yourself projects. The price range of the soldering pencils is $10-$30Soldering stationsSoldering station consists of two parts: soldering pencil and a power station. Soldering pencil is attached to a power station. Power station controls temperature of the iron tip in the wide range. It automatically keeps the iron tip at an appropriate temperature. Desired temperature of soldering iron is set with knob on the face plate of power station. Soldering station can be used for most of soldering projects. It can be used for soldering of through-hole components on circuit board as well as for soldering of very fine surface-mount components as small as 0603 and 0805. The price range of the soldering stations is $40-$150.Soldering rework /repair stations systemsSoldering rework/repair systems are complex soldering tools which are mostly used in industry or in the high-volume manufacturing facilities. This soldering systems are the most expensive soldering tools since they usually consist of power station and 4 or 5 hand pieces including soldering iron, hot-air gun, tweezers , vacuum pump which is used for the de-soldering work. The price range of the soldering systems is $250-$2500.Soldering gunsI do not recommend using soldering guns for fine soldering projects on circuit boards.The most popular brand names for soldering irons in the USA are Weller, Pace and Hakko. Aoyue soldering irons are less popular brand name in the United States then Weller or Pace. However, Aoyue soldering irons are much cheaper and they are good combination of quality and price.There is a wide selection of iron tips. Iron tips come in different shapes and sizes. For most soldering projects you can use screwdriver tip 0.062" or 0.032". For fine soldering projects and for soldering of small surface-mount components you can use conical tip 1/16".ConclusionI recommend a temperature controlled 50W soldering station. This soldering station will be excellent tool for most of soldering projects. My top recommendations are:-Weller WESD51 soldering station (digital)- Weller WES51 soldering station (analog)- Hakko FX-888 soldering station- Aoyue 2702A soldering station- Pace ST-25 soldering station


Where can I go to get some information on soldering iron?

When you use a soldering iron you would be soldering some kind of metal frame or something because soldering irons are irrelevant to soldering iron. Sorry, not applicable.


What is the definition of soldering stand?

soldering iron stand use for the electricians to easily the soldering iron make stand


What is the difference of a soldering iron and a soldering gun?

A soldering iron is a straight tool, sort of like a long screwdriver. A soldering gun actually looks like a gun or a drill.


Where does soldering gun came from?

From a soldering gun supply store


Is soldering enviromentally friendly?

Soldering creates ozone. It is a pollutant.


What is the difference between soldering done at high school and soldering done at an industry?

really no difference except for the quantity of soldering.


Why does the soldering stand have a wet sponge in it?

The soldering stand has a wet sponge on it so you can wipe off and clean the soldering iron!


What are some good soldering irons?

Soldering irons and soldering stations range in price from around $10 upwards. The best soldering irons are usually industrial ones, however these may not be required for home use.


How do you spell soddering?

It is spelled: soldering (pronounced: soddering).


How does cold heat work?

The COLD-HEAT soldering iron is simply a resistive soldering set in a small package. Search google for "resistive soldering".